ASSEMBLY and USE continued
Changer
Changer can only be used when bassinet is installed in Playard.
WARNING
Avoid serious injury or death:
•Always use restraint belt to prevent falls.
•Use changer with infant who weighs less than 8.2 kg (18 lbs.) and is less than 63.5 cm (25 inches) tall.
•Discontinue use of changer if infant can push up on hands and knees or sit unassisted.
•DO NOT carry changer with infant in it.
1Lay changer on flat surface.
2 Grasp middle of each long | Triangular | |
side and gently pull apart until | Tab |
|
short sides “click” and lock in |
|
|
place. |
|
|
NOTE: Make sure changer sides are fully extended and locked.
3 With vinyl side facing up, | ||
insert two (2) |
|
|
on changer into |
|
|
in bassinet and push down |
|
|
to secure. |
|
|
4Push Triangular Tabs into
Triangular Holes in | Triangular |
Playard corners. | Tab |
| Triangular |
| Hole |
5 Secure changer to Playard:
• Pass Attachment Strap through opening in corner of side panel of Playard.
• Fasten strap to outside of Playard.
Repeat for other strap.
Attachment
Strap
6Unfold Changer Storage Area
so it hangs over top rail.
Changer 
Storage Area
CAUTION: DO NOT place supplies weighing more than 2.3 kg (5 lbs.) in changer storage area.
Changer is now ready for use.
6