Graco PD101777B owner manual Tighten vehicle seat belt

Page 32

4.Tighten vehicle seat belt

Push down hard with your knee or free hand in the middle of the child restraint . Then pull and tighten the shoulder portion of the lap/shoulder belt.

5.While pulling the shoulder portion of the lap/shoulder belt, lay the shoulder belt inside the opened lock-off and snap the lock-off over the shoulder belt .

Two lock-offs are provided to allow for the seat to be installed on the right or left side of the vehicle seat. Only use one lock-offat a time. NEVER try to use both lock-offs when installing the child restraint.

DO NOT try to close the lock-off over anything but the shoulder portion of the vehicle lap/shoulder belt. If any other part of the belt is in the way then try another seat location.

For more information on how to tighten the belt for your seat belt system, see Section 7.0 Choosing an Appropriate Vehicle Seat Location, p.18, or your vehicle owner’s manual.

32

Image 32

Contents Read this Manual Table of Contents Table of Contents Page Model Number Manufactured Purchase Date USAFeatures Latch Assembling the Child Restraint Harness Strap Arm T-slot ›Page 2017 Click Assembly is now complete Important Information Very HOT if Left in the SUN. Contact with This Child Restraint Conforms toAN Accident of ANY KIND. An accident Never Give this Child Restraint toYour child must meet all requirements Height and Weight LimitationsWith Built-In Harness Without Built-in Harness Without Back Support Choosing an Appropriate Vehicle Seat Location Vehicle Seat Belt Requirements Safe Vehicle Seat Belt SystemsFor Built-in Harness Only Lap Belts with Automatic Locking Retractor ALRWith or Without Built-in Harness Combination Lap/Shoulder Belt with Locking Latch PlateUnsafe Vehicle Belt Systems Lap Belts with Emergency Locking Retractor ELRCombination Lap/Shoulder Belt with Retractor Passive Restraint Lap or Shoulder Belt Mounted on DoorPassive Restraint Lap Belt with Motorized Shoulder Belt Lap Belts Forward of Seat CreaseLatch Using Child Restraint with Built-in Harness Unbuckle harness straps œ To adjust harness straps ¡ ¢ Must go over red rollers Page Lower anchors must be stored when using vehicle belt Securing the Child Restraint in Your VehicleTighten vehicle seat belt Safety Check for Secure Installation With Latch Safety Check for Secure Installation Securing Your Child in the Child Restraint Avoid bulky clothingPage Harness Removal Remove harness strapsPage Page Harness Strap Arm Slot Page Using Your Child Restraint Without Built-in Harness Incorrectincorrect Incorrect Incorrect Securing Child & Booster Seat in Vehicle Adjusting Head Support Page Removing Back Support Page Page Page Page Rear View of Child Sitting in Seat Correct Using the Tether ™ š Storing Lower Anchors and Tether LatchAirplane Use Important points to rememberTo prevent ejection in sudden stop or crash ™ › ž œ Recline FootCare and Maintenance To Remove Seat Cover BleachPage Replacement Parts and Warranty