10.3 With LATCH
Use vehicle belt (not LATCH connectors) for |
|
installations with children weighing more than |
|
48 pounds (21.7 kg). NOTE: Some vehicle |
|
manufacturers have lower maximum weight |
|
ratings for LATCH anchors, so you must |
|
consult your vehicle owner’s manual or call the | |
vehicle manufacturer to confirm the limits on your | |
vehicle’s LATCH anchors. |
|
1.Unhook LATCH from storage bars on the sides of the seat. For ease of installation, extend LATCH to its maximum length.
2.Place the child restraint firmly against the back of a
3.Hook LATCH Connectors to vehicle lower anchors . Pull firmly on Connectors
to be sure they are attached. Belt must lay flat and not be twisted.
4.Tighten LATCH by pushing down hard on child restraint and pulling the adjustment belt .
5.If you need to remove LATCH to readjust,
pull up on LATCH plate to loosen strap.
|
34