Graco PD101777B owner manual Safety Check for Secure Installation

Page 35

6.NEVER put two LATCH connectors on one vehicle LATCH anchor unless specifically allowed by the vehicle manufacturer .

7.All LATCH seating positions have tether anchors. Secure the top of the seat using the tether strap. See Section 18.0 Using the Tether, page 56.

8.Safety Check for Secure Installation

Perform this test every time you drive with your child.

Twist and pull child restraint forward and to both sides to make sure the LATCH belt does not lengthen or loosen and the child restraint does not easily move. The child restraint should not move side to side or forward more than 1 inch (2.5 cm). .If child restraint is loose or not secure, repeat procedure OR find another location for the child restraint, see Section 7.0 Choosing an Appropriate Vehicle Seat Location, p. 18.

35

Image 35

Contents Read this Manual Table of Contents Table of Contents Page USA Model Number Manufactured Purchase DateFeatures Latch Harness Strap Arm T-slot › Assembling the Child RestraintPage 2017 Click Assembly is now complete Important Information Never Give this Child Restraint to Very HOT if Left in the SUN. Contact withThis Child Restraint Conforms to AN Accident of ANY KIND. An accidentYour child must meet all requirements Height and Weight LimitationsWith Built-In Harness Without Built-in Harness Without Back Support Choosing an Appropriate Vehicle Seat Location Safe Vehicle Seat Belt Systems Vehicle Seat Belt RequirementsLap Belts with Automatic Locking Retractor ALR For Built-in Harness OnlyCombination Lap/Shoulder Belt with Locking Latch Plate With or Without Built-in HarnessPassive Restraint Lap or Shoulder Belt Mounted on Door Unsafe Vehicle Belt SystemsLap Belts with Emergency Locking Retractor ELR Combination Lap/Shoulder Belt with RetractorLap Belts Forward of Seat Crease Passive Restraint Lap Belt with Motorized Shoulder BeltLatch Using Child Restraint with Built-in Harness Unbuckle harness straps œ To adjust harness straps ¡ ¢ Must go over red rollers Page Securing the Child Restraint in Your Vehicle Lower anchors must be stored when using vehicle beltTighten vehicle seat belt Safety Check for Secure Installation With Latch Safety Check for Secure Installation Avoid bulky clothing Securing Your Child in the Child RestraintPage Remove harness straps Harness RemovalPage Page Harness Strap Arm Slot Page Using Your Child Restraint Without Built-in Harness Incorrectincorrect Incorrect Incorrect Securing Child & Booster Seat in Vehicle Adjusting Head Support Page Removing Back Support Page Page Page Page Rear View of Child Sitting in Seat Correct Using the Tether Storing Lower Anchors and Tether Latch ™ šImportant points to remember Airplane UseTo prevent ejection in sudden stop or crash Recline Foot ™ › ž œCare and Maintenance Bleach To Remove Seat CoverPage Replacement Parts and Warranty