Graco PD101777B owner manual Safety Check for Secure Installation

Page 33

6.If a vehicle top tether anchor is available, secure the tether to hold seat in place.

See Section 18.0 Using the Tether, page 56. When not using the tether, hook it on the tether storage bar on the rear of the seat, see page 57.

7. Safety Check for Secure Installation

Perform this test every time you drive with your child.

Twist and pull child restraint forward and to

both sides to make sure the vehicle belt does not lengthen or loosen and the child restraint does not

easily move. The child restraint should not moveœ side to side or forward more than 1 inch (2.5 cm) œ.

If child restraint is loose or not secure, repeat procedure OR find another location for the child restraint, see Section 7.0 Choosing an Appropriate Vehicle Seat Location, p. 18.

33

Page 32 Page 34
Image 33
Page 32 Page 34
Contents Read this Manual Table of Contents Table of Contents Page USA Model Number Manufactured Purchase DateFeatures Latch Harness Strap Arm T-slot › Assembling the Child RestraintPage 2017 Click Assembly is now complete Important Information This Child Restraint Conforms to Very HOT if Left in the SUN. Contact withAN Accident of ANY KIND. An accident Never Give this Child Restraint toHeight and Weight Limitations With Built-In HarnessYour child must meet all requirements Without Built-in Harness Without Back Support Choosing an Appropriate Vehicle Seat Location Safe Vehicle Seat Belt Systems Vehicle Seat Belt RequirementsLap Belts with Automatic Locking Retractor ALR For Built-in Harness OnlyCombination Lap/Shoulder Belt with Locking Latch Plate With or Without Built-in HarnessLap Belts with Emergency Locking Retractor ELR Unsafe Vehicle Belt SystemsCombination Lap/Shoulder Belt with Retractor Passive Restraint Lap or Shoulder Belt Mounted on DoorLap Belts Forward of Seat Crease Passive Restraint Lap Belt with Motorized Shoulder BeltLatch Using Child Restraint with Built-in Harness Unbuckle harness straps œ To adjust harness straps ¡ ¢ Must go over red rollers Page Securing the Child Restraint in Your Vehicle Lower anchors must be stored when using vehicle beltTighten vehicle seat belt Safety Check for Secure Installation With Latch Safety Check for Secure Installation Avoid bulky clothing Securing Your Child in the Child RestraintPage Remove harness straps Harness RemovalPage Page Harness Strap Arm Slot Page Using Your Child Restraint Without Built-in Harness Incorrectincorrect Incorrect Incorrect Securing Child & Booster Seat in Vehicle Adjusting Head Support Page Removing Back Support Page Page Page Page Rear View of Child Sitting in Seat Correct Using the Tether Storing Lower Anchors and Tether Latch ™ šImportant points to remember Airplane UseTo prevent ejection in sudden stop or crash Recline Foot ™ › ž œCare and Maintenance Bleach To Remove Seat CoverPage Replacement Parts and Warranty
Top Page Image Contents