14.0Securing Child & Booster Seat in Vehicle
1.Place booster seat firmly against the back of
a |
|
lap/shoulder belt only. | |
2. Place child in car seat with child’s back flat | |
against back of car seat. |
|
3. Position lap/shoulder belt through shoulder |
|
belt guide not underneath shoulder belt |
|
guide . Belt should pass over vehicle belt |
|
guide . Fasten buckle and pull up on the |
|
shoulder belt to tighten. |
|
4.If belt lays across child’s neck, head or face, redirect belt over shoulder by adjusting the head support setting, See page 47, Adjusting Head Support.
5.Check that shoulder belt is properly positioned over shoulder and snug against child. A snug strap should not allow any slack. It lies in a relatively straight line without sagging. It does not press on the child’s flesh or push the child’s body into an unnatural position.
46