Aiwa CDC-MP3 manual Setting the Clock Radio Operation

SETTING THE CLOCK RADIO OPERATION

To turn the unit on
You can turn the unit on by pressing any	1 Press FUNCTION repeatedly to select
button on the front panel except OPEN and
	the band from among F1 (FM1), F2
the Jog Dial.
	(FM2), F3 (FM3), A1 (AM1) and A2 (AM2).
	The band indications appear cyclically in

1 With the unit on, press and hold SELECT	order.
for more than 2 seconds until the clock	• F1, F2 and F3 share the same frequency
indication appears.	range.
	• A1 and A2 share the same frequency range.
	Band	Frequency
	indication	indication

2 Press TUNE i, then rotate the Jog Dial to set the hour.

Press TUNE k, then rotate the Jog Dial to set the minute.

Rotate the Jog Dial clockwise to go forward.

Rotate the Jog Dial counterclockwise to go backward.

3 Press SELECT.

The clock starts working from 0 second.

To have the clock displayed when the unit is on

Press DISP. To return the unit to its former display, press DISP repeatedly.

2 Press (and hold for more than 2 seconds) either TUNE i or TUNE k to tune in the desired station.

The unit starts scanning and tunes in a station automatically (seek tuning).

Press TUNE i to increase and TUNE k to decrease the frequency.

Press the button again to cancel seek tuning. Repeat the procedure until the desired station is tuned in.

Note

If you press (for less than 0.5 second at a time) either TUNE ior TUNE k, the frequency increases or decreases step by step.

3 Adjust the volume with the Jog Dial.

5 ENGLISH