Graco PD246612A owner manual To adMust harness straps

Page 29

5.The harness straps must go into the slots

even with or Must above the shoulders .

If straps are in proper slots go to page 33.

6. To adMust harness straps:

a) Turn seat around so you will have access to the rear of the seat.

b) From the rear of the seat remove straps from metal junction plate .

29

Image 29

Contents Featuring Table of Contents Table of Contents Page Page Register Your Child Restraint Model Number Date of manufacture Purchase DateUseful Information CertiÀcation Features Page Assembling the Head Support Assembly is now complete ‡ Never Leave Your Child Unattended Page Your child must meet all requirements Height and Weight LimitationsWith Built-In Harness Without Built-in Harness Your child must meet all requirements ‡ Weight 30 to 100 lbsWithout Back Support Choosing an Appropriate Vehicle Seat Location Safe Vehicle Seat Belt Systems Vehicle Seat Belt Requirements‡ Lap Belts with Automatic Locking Retractor ALR For Built-in Harness Only‡ Combination LapShoulder Belt with Locking Latch Plate With or Without Built-in HarnessRepeat above steps until secure 2 1.25 cm To Install Locking Clip‡ Lap Belts with Emergency Locking Retractor ELR Unsafe Vehicle Belt Systems‡ Combination LapShoulder Belt with Retractor ‡ Passive Restraint Lap or Shoulder Belt Mounted on Door‡ Lap Belts Forward of Seat Crease ‡ Passive Restraint Lap Belt with Motorized Shoulder BeltLatch What is LATCH?Page Latch System Using Child Restraint with Built-in Harness Page To adMust harness straps Page Must go over red rollers Page Securing the Child Restraint in Your Vehicle Lower anchors must be stored when using vehicle beltLocation p Safety Check for Secure InstallationTighten vehicle seat belt Lay flat and not be twisted With LatchSafety Check for Secure Installation ‡ Avoid bulky clothing Securing Your Child in the Child RestraintPage Remove harness straps Harness Removal or Re-attaching HarnessPage Page Harness Strap Arm T-slot Reverse Instructions to Reinstall Harness Using Your Child Restraint Without Built-in Harness Incorrectincorrect Incorrect Incorrect Securing Child & Booster Seat in Vehicle Support setting See page 48, Adjusting Head SupportAdjusting Head Support Removing or Re-attaching Back Support Page To Reattach Back Support if Needed Page Page Rear View of Child Sitting in Seat Correct Using the Tether Storing Lower Anchors and Tether Latch Important points to remember Airplane UseTo prevent ejection in sudden stop or crash Recline Foot Care and Maintenance Prevent serious inMury or death Buckle Cleaning ProcessTo Remove or Re-attach Seat Cover Replacement Parts and Warranty