Graco PD246612A owner manual With Latch, Lay flat and not be twisted

Page 35

11.3 With LATCH

Use vehicle belt (not LATCH connectors) for installations with children weighing more than 48 pounds (21.7 kg). NOTE: Some vehicle manufacturers have lower ma[imum weight ratings for LATCH anchors so you must consult your vehicle owner’s manual or call the vehicle manufacturer to confirm the limits on your vehicle’s LATCH anchors.

1.Unhook LATCH from storage bars on the sides of the seat. For ease of installation e[tend LATCH to its ma[imum length.

2.Place the child restraint firmly against

the back of a forward-facing vehicle seat.

	3. Hook LATCH Connectors to vehicle
	lower anchors . Pull firmly on Connectors
	to be sure they are attached. Belt must
	lay flat and not be twisted.
	4. Tighten LATCH by pushing down hard on
	child restraint and pulling the adjustment belt .
	child restraint and pulling the adjustment belt .
	5. If you need to remove LATCH to readjust
	push button on LATCH buckle
	to loosen strap.
	35

Image 35

Contents Featuring Table of Contents Table of Contents Page Page Register Your Child Restraint Model Number Date of manufacture Purchase DateUseful Information CertiÀcation Features Page Assembling the Head Support Assembly is now complete ‡ Never Leave Your Child Unattended Page Your child must meet all requirements Height and Weight LimitationsWith Built-In Harness Without Built-in Harness Your child must meet all requirements ‡ Weight 30 to 100 lbsWithout Back Support Choosing an Appropriate Vehicle Seat Location Safe Vehicle Seat Belt Systems Vehicle Seat Belt Requirements‡ Lap Belts with Automatic Locking Retractor ALR For Built-in Harness Only‡ Combination LapShoulder Belt with Locking Latch Plate With or Without Built-in HarnessRepeat above steps until secure 2 1.25 cm To Install Locking Clip‡ Passive Restraint Lap or Shoulder Belt Mounted on Door Unsafe Vehicle Belt Systems‡ Lap Belts with Emergency Locking Retractor ELR ‡ Combination LapShoulder Belt with Retractor‡ Lap Belts Forward of Seat Crease ‡ Passive Restraint Lap Belt with Motorized Shoulder BeltLatch What is LATCH?Page Latch System Using Child Restraint with Built-in Harness Page To adMust harness straps Page Must go over red rollers Page Securing the Child Restraint in Your Vehicle Lower anchors must be stored when using vehicle beltLocation p Safety Check for Secure InstallationTighten vehicle seat belt Lay flat and not be twisted With LatchSafety Check for Secure Installation ‡ Avoid bulky clothing Securing Your Child in the Child RestraintPage Remove harness straps Harness Removal or Re-attaching HarnessPage Page Harness Strap Arm T-slot Reverse Instructions to Reinstall Harness Using Your Child Restraint Without Built-in Harness Incorrectincorrect Incorrect Incorrect Securing Child & Booster Seat in Vehicle Support setting See page 48, Adjusting Head SupportAdjusting Head Support Removing or Re-attaching Back Support Page To Reattach Back Support if Needed Page Page Rear View of Child Sitting in Seat Correct Using the Tether Storing Lower Anchors and Tether Latch Important points to remember Airplane UseTo prevent ejection in sudden stop or crash Recline Foot Care and Maintenance Prevent serious inMury or death Buckle Cleaning ProcessTo Remove or Re-attach Seat Cover Replacement Parts and Warranty