Graco PD246612A owner manual Reverse Instructions to Reinstall Harness

Page 43

12.Tuck seat pad in between the gap of the back support and seat area of the booster seat to allow 2 elastic straps to show at the rear of the seat.

13.Attach 2 seat pad elastic straps onto the hooks on the rear of the child restraint as shown in 12 .

14.Pull elastic strap on the seat pad through the vehicle belt guide on side of seat and attach to hook as shown.

Repeat on other side 13 .

REVERSE INSTRUCTIONS TO REINSTALL HARNESS.

See Section 10.0 page 27-32 for the correct path for the harness.

12

13

43

Image 43

Contents Featuring Table of Contents Table of Contents Page Page Register Your Child Restraint Model Number Date of manufacture Purchase DateUseful Information CertiÀcation Features Page Assembling the Head Support Assembly is now complete ‡ Never Leave Your Child Unattended Page With Built-In Harness Height and Weight LimitationsYour child must meet all requirements Without Built-in Harness Your child must meet all requirements ‡ Weight 30 to 100 lbsWithout Back Support Choosing an Appropriate Vehicle Seat Location Safe Vehicle Seat Belt Systems Vehicle Seat Belt Requirements‡ Lap Belts with Automatic Locking Retractor ALR For Built-in Harness Only‡ Combination LapShoulder Belt with Locking Latch Plate With or Without Built-in HarnessRepeat above steps until secure 2 1.25 cm To Install Locking Clip‡ Passive Restraint Lap or Shoulder Belt Mounted on Door Unsafe Vehicle Belt Systems‡ Lap Belts with Emergency Locking Retractor ELR ‡ Combination LapShoulder Belt with Retractor‡ Lap Belts Forward of Seat Crease ‡ Passive Restraint Lap Belt with Motorized Shoulder BeltLatch What is LATCH?Page Latch System Using Child Restraint with Built-in Harness Page To adMust harness straps Page Must go over red rollers Page Securing the Child Restraint in Your Vehicle Lower anchors must be stored when using vehicle beltTighten vehicle seat belt Safety Check for Secure InstallationLocation p Lay flat and not be twisted With LatchSafety Check for Secure Installation ‡ Avoid bulky clothing Securing Your Child in the Child RestraintPage Remove harness straps Harness Removal or Re-attaching HarnessPage Page Harness Strap Arm T-slot Reverse Instructions to Reinstall Harness Using Your Child Restraint Without Built-in Harness Incorrectincorrect Incorrect Incorrect Securing Child & Booster Seat in Vehicle Support setting See page 48, Adjusting Head SupportAdjusting Head Support Removing or Re-attaching Back Support Page To Reattach Back Support if Needed Page Page Rear View of Child Sitting in Seat Correct Using the Tether Storing Lower Anchors and Tether Latch Important points to remember Airplane UseTo prevent ejection in sudden stop or crash Recline Foot Care and Maintenance Prevent serious inMury or death Buckle Cleaning ProcessTo Remove or Re-attach Seat Cover Replacement Parts and Warranty