4.1 Adjusting Handle
1.Press handle adjustment buttons on both sides of handle ➊.
2.Rotate handle until it clicks into any of the
4 positions:
Position A: MUST be used
when carrying by handle,
Position B,C: are convenience positions,
Position D: is the sitting position,
NEVER use position B in the vehicle.
BOTH handle adjustment buttons must pop out to lock handle in place ➋.
3.Push and pull on the handle to be sure it is locked firmly in position.
➊
A | B | ➋ |
Carrying |
|
|
C
D Sitting
4.2 Removing and Attaching Infant Restraint
To remove, squeeze release handle at back of | ➌ |
infant restraint and lift out of base as shown ➌. |
To put infant restraint in base, push infant restraint down until it clicks into base. Pull up on infant restraint to be sure it is latched firmly into base.
16