6.Buckle the vehicle belt. Make sure the buckle
tongue goes into the correct buckle, and not the adjacent one . The vehicle belt should not be twisted or turned.
7.Now the vehicle seat belt must be tightened.
Push down hard with | |
your knee or free hand | |
in the middle of the car |
|
seat . Then pull and |
|
tighten the vehicle belt. |
|
If you have a
If you have a lap/ shoulder combination belt, go to step 9.
8.Tightening a
An automatically adjusted lap belt is tightened by feeding the vehicle belt back into its retractor while pushing down hard on the car seat. Make sure that vehicle belt is locked in place and very tight.
27