Graco 8480 owner manual

Page 18

9. Inspect the harness straps from the front and back of the car seat to be sure the straps are inserted at the same level and that they are not twisted. Twisted belts can create slack in the harness straps and reduce the protection provided by the car seat.

10. Pull on the harness straps from the front of the car seat to be sure the straps are secure.

11. Check the crotch

‹

strap. There are two

possible positions for

 

it. Choose the position

 

that is closest to but

 

not under your child.

 

If you need to move

 

the strap, reach under the seat and push the

 

metal retainer up through the slot sideways ‹. Push it back down through the appropriate slot (making sure the red button faces out) and tug on it to be sure that it is properly secured.

The components of your harness are now properly positioned for your child. You will fine-tune the fit each time you place your child in the car seat by using the adjustment strap.

Remember to check the shoulder and crotch straps as your child grows and move them to the next position when necessary.

18

Image 18
Contents Car Seat Booster Table of Contents Keep this manual Securing your Child and the Booster SeatYour child’s safety depends on Safety Information About Your Child child weighs from 20 to  child is at least one yearWithout built-in harness About Using this Car Seat in Your Vehicle When the Car Seat is Not Occupied Life and Condition of the Car Seat Features and Components Page Selecting a Suitable Location for the Car Seat Be Sure Your Vehicle Seat Meets These Requirements Edge of the vehicle seat Use of the Car Seat with the Built-in Harness By fully pushing Red adjustment button Remove the ends From the front of the carPage Selecting a Suitable Location for the Car Seat Be Sure Your Vehicle Seat Belt Meets These Requirements Page ‹ Œ Page Belt. You must use Positioning and Securing the Car Seat in Your Vehicle Page Page Tightening a lap/shoulder combination belt To install the locking clip Be usedDo not use locking clip as a vehicle belt shortener To secure the tether To loosen, lift up on the metal tongue of the buckle Safety Check Keeps the straps on your child’s shoulders Hear a click and check that the harness is Final Safety Check Using the Car Seat in an AirplaneUse of the Car Seat without the Built-in Harness 40 lbsPage Removing the Built-in Harness So it won’t be Way when notNeeded ‹ Use ŒPlate on the rear Seat ‹ Place vehicle lap belt Choose the position thatFinal Safety Checks Using the Booster Seat in an Airplane  This Restraint is not certifiedBooster seat on an airplane  to Remove the Seat Cover for Cleaning Under the front of the seat push in the tab to Adjustment plate is under the cloth ‹. Snap Button is pushedRegistering Your Car Seat Parts List Price Return the form at right with payment toShip to Page Page Page Page Page Page Keep this manual