Graco 8480 owner manual Needed , So it won’t be, Way when not, Use

Page 39

1.Behind the seat, remove the ends of the two shoulder straps from the metal junction plate (see figure 4, page 17).

2.In front of the seat, pull the strap ends through the slots. Do not remove the buckles or harness clip from the straps.

	3. Underneath the seat,
	pull the straps down
	through the holes in
	the cover and the seat,
	guiding the buckles
	and harness clip as
	needed .
	4. To remove the crotch
	strap, reach under the
	seat and push the metal
	retainer up through the slot sideways.
	Buckle the crotch strap to the harness
	strap for safekeeping.
	5. The metal junction plate
	and adjustment strap are
	not removable. Push
	in the red adjustment
	button in front of the			B
	seat and pull the strap			B
	seat and pull the strap
	to the rear of the seat				A
	so it won’t be in				A
	so it won’t be in		A. Push in the red button.
	the way when not		A. Push in the red button.
	the way when not	B. Pull the strap out the back.
	in use .	B. Pull the strap out the back.
	in use .

6.Snap the junction plate onto the storage tabs provided for it (see the molded outline of the

39

Image 39

Contents Car Seat Booster Table of Contents Securing your Child and the Booster Seat Keep this manualYour child’s safety depends on About Your Child Safety Information child is at least one year child weighs from 20 toWithout built-in harness About Using this Car Seat in Your Vehicle When the Car Seat is Not Occupied Life and Condition of the Car Seat Features and Components Page Selecting a Suitable Location for the Car Seat Edge of the vehicle seat Be Sure Your Vehicle Seat Meets These RequirementsUse of the Car Seat with the Built-in Harness By fully pushing Red adjustment button From the front of the car Remove the endsPage Selecting a Suitable Location for the Car Seat Be Sure Your Vehicle Seat Belt Meets These Requirements Page ‹ Œ Page Belt. You must use Positioning and Securing the Car Seat in Your Vehicle Page Page Tightening a lap/shoulder combination belt Be used To install the locking clipDo not use locking clip as a vehicle belt shortener To loosen, lift up on the metal tongue of the buckle To secure the tetherSafety Check Keeps the straps on your child’s shoulders Hear a click and check that the harness is Using the Car Seat in an Airplane Final Safety Check40 lbs Use of the Car Seat without the Built-in HarnessPage Removing the Built-in Harness Use Œ Way when notNeeded ‹ So it won’t bePlate on the rear Seat ‹ Choose the position that Place vehicle lap beltFinal Safety Checks Using the Booster Seat in an Airplane This Restraint is not certifiedBooster seat on an airplane to Remove the Seat Cover for Cleaning Under the front of the seat push in the tab to Button is pushed Adjustment plate is under the cloth ‹. SnapRegistering Your Car Seat Return the form at right with payment to Parts List PriceShip to Page Page Page Page Page Page Keep this manual