Graco 8480 Plate on the rear Seat ‹, Be sure that the vehicle seat back is locked in position

Page 40

plate) on the rear of the

‹

 

seat ‹.

 

7. Store the harness in a cool dry place until it is needed again. Then reinstall by reversing these instructions. See the illustration on page 46 to check the correct path for the harness.

6.2Securing Your Child and the Booster Seat with the Vehicle Lap/Shoulder Belt

1.Use of the tether is not required when using the seat in this mode; however, it may keep the seat more stable. See section 5.3, step 11, “To secure the tether” (page 31) for instructions on tether use.

2.Place booster seat firmly against the back of a forward-facing vehicle seat suitable for the booster seat as explained in section 4, “Selecting a Suitable Location for the Car Seat” (page 13) and equipped with a lap/ shoulder belt. DO NOT place booster seat in a seating position that only provides a lap belt. If a front passenger seat is used, slide the vehicle seat rearward as far as possible from the dashboard.

3.Be sure that the vehicle seat back is locked in position.

40

Image 40
Contents Car Seat Booster Table of Contents Keep this manual Securing your Child and the Booster SeatYour child’s safety depends on Safety Information About Your Child child weighs from 20 to  child is at least one yearWithout built-in harness About Using this Car Seat in Your Vehicle When the Car Seat is Not Occupied Life and Condition of the Car Seat Features and Components Page Selecting a Suitable Location for the Car Seat Be Sure Your Vehicle Seat Meets These Requirements Edge of the vehicle seat Use of the Car Seat with the Built-in Harness By fully pushing Red adjustment button Remove the ends From the front of the carPage Selecting a Suitable Location for the Car Seat Be Sure Your Vehicle Seat Belt Meets These Requirements Page ‹ Œ Page Belt. You must use Positioning and Securing the Car Seat in Your Vehicle Page Page Tightening a lap/shoulder combination belt To install the locking clip Be usedDo not use locking clip as a vehicle belt shortener To secure the tether To loosen, lift up on the metal tongue of the buckle Safety Check Keeps the straps on your child’s shoulders Hear a click and check that the harness is Final Safety Check Using the Car Seat in an AirplaneUse of the Car Seat without the Built-in Harness 40 lbsPage Removing the Built-in Harness Way when not Needed ‹So it won’t be Use ŒPlate on the rear Seat ‹ Place vehicle lap belt Choose the position thatFinal Safety Checks  This Restraint is not certified Using the Booster Seat in an AirplaneBooster seat on an airplane  to Remove the Seat Cover for Cleaning Under the front of the seat push in the tab to Adjustment plate is under the cloth ‹. Snap Button is pushedRegistering Your Car Seat Parts List Price Return the form at right with payment toShip to Page Page Page Page Page Page Keep this manual