Graco 8480 owner manual Be used, To install the locking clip

Page 29

A lap/shoulder combination belt with a

latchplate that can slide freely along the belt requires the locking clip, unless your vehicle’s seat belt can be converted in another way that is described in your vehicle owner’s manual. See your vehicle owner’s manual to find out if your vehicle belt can be converted to prevent movement of the lap portion of the belt. Otherwise, the locking clip MUST

be used.

10.To install the locking clip:

a.Tighten the buckled vehicle belt by pushing down hard on the car seat and pulling hard on the shoulder belt.

b.While continuing to push down on the car seat, let go of the shoulder strap and pinch the two straps together just behind the buckle tongue.

c.While still pinching the straps together, unbuckle the vehicle belt. Do not allow the straps to slip.

d. Connect the lap
belt to the shoulder
belt to the shoulder
belt by placing the
locking clip on the
belts about ½ inch
from the buckle
tongue as shown .

½

inch

29

Image 29

Contents Car Seat Booster Table of Contents Securing your Child and the Booster Seat Keep this manualYour child’s safety depends on About Your Child Safety Information child is at least one year child weighs from 20 toWithout built-in harness About Using this Car Seat in Your Vehicle When the Car Seat is Not Occupied Life and Condition of the Car Seat Features and Components Page Selecting a Suitable Location for the Car Seat Edge of the vehicle seat Be Sure Your Vehicle Seat Meets These RequirementsUse of the Car Seat with the Built-in Harness By fully pushing Red adjustment button From the front of the car Remove the endsPage Selecting a Suitable Location for the Car Seat Be Sure Your Vehicle Seat Belt Meets These Requirements Page ‹ Œ Page Belt. You must use Positioning and Securing the Car Seat in Your Vehicle Page Page Tightening a lap/shoulder combination belt Be used To install the locking clipDo not use locking clip as a vehicle belt shortener To loosen, lift up on the metal tongue of the buckle To secure the tetherSafety Check Keeps the straps on your child’s shoulders Hear a click and check that the harness is Using the Car Seat in an Airplane Final Safety Check40 lbs Use of the Car Seat without the Built-in HarnessPage Removing the Built-in Harness Needed ‹ Way when notSo it won’t be Use ŒPlate on the rear Seat ‹ Choose the position that Place vehicle lap beltFinal Safety Checks Booster seat on an airplane Using the Booster Seat in an Airplane This Restraint is not certified to Remove the Seat Cover for Cleaning Under the front of the seat push in the tab to Button is pushed Adjustment plate is under the cloth ‹. SnapRegistering Your Car Seat Return the form at right with payment to Parts List PriceShip to Page Page Page Page Page Page Keep this manual