OPERATIONS and ADJUSTMENTS (continued)
6Overhead Shield Adjustment (fig. e):
•To adjust: Press both buttons down and move shield to desired position closest to child. Release buttons to lock shield into place. Check by pulling out on shield.
NOTE: Shield does not need to contact child when in closest position; harness system restrains child.
7Changing Harness Strap Slots: A Loosen harness straps:
Lift adjuster lever and pull harness straps out (see 1 ).
BRemove both harness strap loops from Splitter Plate on back of car seat.
CChange harness strap slots.
Make sure harness straps are threaded through matching slot of seat pad and car seat.
It may be necessary to remove seat pad from top of car seat.
D
Slide each harness strap loop onto Splitter Plate.
NOTE:
•Make sure both strap loops are securely attached within Splitter Plate hook.
•Make sure straps are NOT twisted and are routed behind stand (fig. f).
12