Dantax LR-8500 manual Tuner Operation, Station Selection, Tuner-Mode, Preset Memory

Page 23

Tuner Operation

TUN/PRE

SELECT

SOURCE

AM/FMT.MODE

The LR-8500's tuner is capable of tuning AM, FM and FM Stereo broadcast stations. Stations may be tuned manually, or they may be stored as favorite station presets and recalled from a 50-position memory.

Station Selection

1Press the AM/FM button on the remote controller to select the tuner as an input

or

The tuner may be selected from the front panel by either pressing the SOURCE (6/n) buttons until the tuner is active or by pressing the AM/FM button.

2Pressing the AM/FM button or the AM/FM button on the front panel again to switch between AM and FM so that the desired frequency band is selected.

3Press the T.MODE on the front panel (or the TUN-M but- ton on the remote controller) to select manual or auto- matic tuning.

4Select "AUTO TUNING" and each press of the TUNING(v/^) button (or TUN/PRE button). Then put the tuner in a scan mode that seek the next higher or lower frequency station with acceptable signal strength.

•Select "MAUNAL TUNING" and each press of the TUN- ING(v/^) button (or TUN/PRE button). The frequency increases or decreases by one increment.

5Stations may also be tuned directly. To enter a station's frequency directly, first select the AM or FM. Next, press the DIRECT button on the remote controller and enter the station frequency by pressing the Numeric buttons.

NUMERIC AM/FM

TUNING

TUN-M DIRECT

PRESET

MEMO

Tuner-Mode

Pressing the TUN-M button on the remote controller alternates between Stereo mode and Mono mode.

- STEREO

FM stereo broadcasts are received in stereo and the STEREO indicator lights in the display.

- MONO

To compensate for weak FM stereo reception, select this mode. Reception will now be forced monaural, reducing unwanted noise.

Preset Memory

You can preset a maximum of 50 favorite channels.

1Press the MEMO button. The two underscore lines will appear at the far right side of the display.

2Within 5 seconds, press the Numeric buttons corre- sponding to the location where you wish to store this station's frequency.

3Repeat the process after tuning any additional stations to be preset.

Recalling Preset Stations

•To manually select a station previously entered in the pre- set memory, press the Numeric buttons that correspond to the desired station's memory location.

•To manually tune through the list of stored preset stations one by one, press the PRESET(v/^) button or the remote controller or the TUN/PRE (6/n) button on the front panel.

- 23 -

Page 22 Page 24
Image 23
Page 22 Page 24
Contents LR-8500 If in Doubt Consult a Competent ELECTRI- Cian Important Safety InstructionsIMPORTANTfor U.K.Customers Blue Neutral Brown LiveTable of Contents Back-up Memory Function When to Use ResetBefore Use Read this before operationNeo6 offers several important improvements as follow DescriptionCenter speaker Description ConnectionsAbout Dolby Pro Logic Front left and right speakersSurround left and right speakers, and surround back speaker Surround back speakersSubwoofer Front left and right speakers, and a center speakerRS-232C Power cord AC InputPRE OUT SUB Woofer jack Audio Components Video convert There are 3 types of video jacks on the rear panelVideo jack Component jackVideo Components and Advanced Connecting Supplied AM loop antenna is for indoor use only Connecting the supplied FM antennaConnecting the supplied AM loop antenna Supplied FM antenna is for indoor use onlyFront Panel Control FunctionsTV / VID Display Remote Control UnitPower TEST-TDirection Tuning UP/DOWNPreset UP/ Down TOP MenuZone II Remote Control Unit TUN-M Source Select Volume STANDBY/ON Menu EnterControl Functions Basic Operations Input SelectorsPress to select input sources Volume knobSurround Mode Selector Sleep Timer FunctionOFF Surround Mode Night ModeMAX MIDII Audio Outputs Zone II OperationSize of Speakers Speaker ConfigurationInput the distance from your listening position Balancing relative volume between speakers using Test ToneTuner-Mode Preset MemoryTuner Operation Station SelectionCT Clock Time RDS Radio Data System Remote Controller OnlyPS Program Service Name PTY Program TypeVideo Tape Dubbing System Configuration OSD On Screen DisplayMaking Configuration Adjustments Video OperationsFunction Setup System ConfigurationFunction Setup Surround SetupUpsampling Dolby SurrDolby Surround Speaker Setup Preference Setup Distance AdjustCH Level Adjust Back to Main Menu Zone II SetupRoom Auto Setup Check all speaker wire connections and then rerun ErrorCode Check Method Controlling other Components Connected to the LR-8500Direct Code Entry Method Manual Search MethodVCR Brand List Programming the RemoteSAT Brand List TV Brand List Erres Pathe Cinema Troubleshooting PAL / Ntsc SpecificationsOutput Power DTSLuxman CORPORATION, Japan

LR-8500 specifications

The Dantax LR-8500 is an impressive entry in the realm of audio engineering, known for its advanced capabilities and high-quality sound reproduction. This versatile device caters to both audiophiles and casual listeners alike, making it a significant player in the industry.

One of the standout features of the Dantax LR-8500 is its powerful amplification system. With a robust power rating, it delivers clear, dynamic sound that encapsulates every nuance of the audio spectrum. The amplifier is designed to handle a wide range of speaker impedances, making it compatible with various setups without sacrificing audio quality. This flexibility allows users to tailor their listening experience to their specific preferences.

The LR-8500 is equipped with a range of connectivity options that prioritize convenience and versatility. Users can enjoy seamless wireless connectivity with Bluetooth capabilities, allowing them to stream music directly from smartphones, tablets, and other devices with ease. Additionally, multiple inputs, including optical and coaxial connections, are available, ensuring compatibility with other audio sources such as TVs, gaming consoles, and CD players.

Incorporating cutting-edge technologies, the Dantax LR-8500 features advanced digital signal processing (DSP). This technology enhances sound quality by optimizing audio performance for different genres and environments. Users can choose from various preset modes, enabling them to enjoy a tailored sound experience whether they’re listening to music, watching movies, or playing video games.

The design of the LR-8500 reflects a commitment to both aesthetic appeal and functionality. The sleek, modern look fits seamlessly into any home décor while providing intuitive controls for easy operation. The illuminated display screen offers clear visibility, making it simple to navigate settings and features, even in low light.

Moreover, the Dantax LR-8500 is energy-efficient, ensuring that high performance does not come at the expense of excessive power consumption. This consideration demonstrates Dantax's commitment to sustainability while providing users with a premium audio experience.

In conclusion, the Dantax LR-8500 stands out due to its robust features, modern technology, and elegant design. Ideal for a range of users, it embodies the perfect blend of quality, performance, and versatility in the competitive audio market. Whether for casual enjoyment or serious listening sessions, the LR-8500 offers an audio experience that is hard to match.
Top Page Image Contents