Dantax LR-8500 manual Distance Adjust, CH Level Adjust, Preference Setup

Page 29

System Configuration

no adjustments are needed and you may skip this section. However, should you wish to change one of the settings. The available choices at which point low-frequency infor- mation will be sent to the subwoofer, rather than to the main speaker channel, are 40Hz, 60Hz, 80Hz, 100Hz, 120Hz and 200Hz.

EDISTANCE ADJUST

DISTANCE ADJUST

FL

: 3.0

M

SBR

: 3.0

M

CEN

: 3.0

M

SBL

: 3.0

M

FR

: 3.0

M

SL

: 3.0

M

SR

: 3.0

M

SUB

: 3.0

M

DELAY RESET : OFF

 

 

UNIT : METER

 

 

 

A / V SYNC DELAY

 

: 0 mS

BACK TO MAIN MENU

Due to the different distances between the listening posi- tion and each speaker position, the amount of time it takes for sound to reach your ears from each channel is different. You may compensate for this difference through the use of the delay settings to adjust the timing for the speaker place- ment and acoustic conditions in your listening room or home theater.

NOTE

Once the DELAY ADJUST menu is on-screen, note that default for distance settings is in meter. If your measure- ments are not in meter, change to feet at the UNIT line.

FCH LEVEL ADJUST

CH LEVEL ADJUST

FL

:

0dB

SBR

:

0dB

CEN

:

0dB

SBL

:

0dB

FR

:

0dB

SL

:

0dB

SR

: 0dB

SUB

: 0dB

LEVEL DEFAULT

: OFF

 

 

TEST TONE SEQ

: AUTO

 

TEST TONE

: OFF

 

 

BACK TO MAIN MENU

Channel level adjustment is a key part of the configuration of any surround sound product. It is particularly important for a digital receiver such as the LR-8500, as correct out- puts ensure that you hear soundtracks with proper direc- tionality and intensity.

Listeners are often confused about the operation of the sur- round channels. While some assume that sound should always be coming from each speaker, most of the time

there will be little or no sound in the surround channels. This is because they are only used when a movie director or sound mixer specifically places sound there to create ambience or special effect, or to continue action from the front of the room to the rear. When the output levels are properly set, it is normal for surround speakers to operate only occasionally. Artificially increasing the volume to the rear speakers may destroy the illusion of an enveloping sound field that duplicates the way you hear sound in a movie theater or concert hall.

Before beginning the output level adjustment process, make certain that all speaker connections have been prop- erly made. The system volume should be set to the level that you will use during a typical listening session

NOTE

You can adjust channel level by pressing the TEST TONE button on the remote control.

GPREFERENCE SETUP

PREFERENCE SETUP

DISPLAY TIME OUT

: OFF

DISPLAY MODE

: FULL

VOLUME DEFAULT

: OFF

DEFAULT VOL SET

: -25dB

SEMI OSD TIME OUT

: 5

FULL OSD TIME OUT

: 20

DEFAULT SURR MODE : ON

BACK TO MAIN MENU

•DISPLAY TIME OUT

Select amount of time(3s~10s) that the display to fade out of front panel. Select OFF if you do not wish to the front panel displays fade out.

•DISPLAY MODE

FULL: Normal brightness.

HALF: Half the normal brightness level.

OFF: All of the front panel indicators will go dark.

•VOLUME DEFAULT ON

OFF

•DEFAULT VOL SET

Set the desired turn-on volume. This setting may not be made with the regular volume controls.

•SEMI OSD TIME OUT

The semi-OSD system places one-line message at the

- 29 -

Page 28 Page 30
Image 29
Page 28 Page 30
Contents LR-8500 IMPORTANTfor U.K.Customers Important Safety InstructionsBlue Neutral Brown Live If in Doubt Consult a Competent ELECTRI- CianTable of Contents Before Use When to Use ResetRead this before operation Back-up Memory FunctionNeo6 offers several important improvements as follow DescriptionAbout Dolby Pro Logic Description ConnectionsFront left and right speakers Center speakerSubwoofer Surround back speakersFront left and right speakers, and a center speaker Surround left and right speakers, and surround back speakerRS-232C Power cord AC InputPRE OUT SUB Woofer jack Audio Components Video jack There are 3 types of video jacks on the rear panelComponent jack Video convertVideo Components and Advanced Connecting Connecting the supplied AM loop antenna Connecting the supplied FM antennaSupplied FM antenna is for indoor use only Supplied AM loop antenna is for indoor use onlyFront Panel Control FunctionsPower Display Remote Control UnitTEST-T TV / VIDPreset UP/ Down Tuning UP/DOWNTOP Menu DirectionZone II Remote Control Unit Control Functions Basic Operations Source Select Volume STANDBY/ON Menu EnterInput Selectors TUN-MSurround Mode Selector Volume knobSleep Timer Function Press to select input sourcesMAX Surround Mode Night ModeMID OFFII Audio Outputs Zone II OperationSize of Speakers Speaker ConfigurationInput the distance from your listening position Balancing relative volume between speakers using Test ToneTuner Operation Preset MemoryStation Selection Tuner-ModePS Program Service Name RDS Radio Data System Remote Controller OnlyPTY Program Type CT Clock TimeMaking Configuration Adjustments System Configuration OSD On Screen DisplayVideo Operations Video Tape DubbingFunction Setup System ConfigurationSurround Setup Function SetupUpsampling Dolby SurrDolby Surround Speaker Setup Preference Setup Distance AdjustCH Level Adjust Back to Main Menu Zone II SetupRoom Auto Setup Check all speaker wire connections and then rerun ErrorDirect Code Entry Method Controlling other Components Connected to the LR-8500Manual Search Method Code Check MethodVCR Brand List Programming the RemoteSAT Brand List TV Brand List Erres Pathe Cinema Troubleshooting Output Power SpecificationsDTS PAL / NtscLuxman CORPORATION, Japan

LR-8500 specifications

The Dantax LR-8500 is an impressive entry in the realm of audio engineering, known for its advanced capabilities and high-quality sound reproduction. This versatile device caters to both audiophiles and casual listeners alike, making it a significant player in the industry.

One of the standout features of the Dantax LR-8500 is its powerful amplification system. With a robust power rating, it delivers clear, dynamic sound that encapsulates every nuance of the audio spectrum. The amplifier is designed to handle a wide range of speaker impedances, making it compatible with various setups without sacrificing audio quality. This flexibility allows users to tailor their listening experience to their specific preferences.

The LR-8500 is equipped with a range of connectivity options that prioritize convenience and versatility. Users can enjoy seamless wireless connectivity with Bluetooth capabilities, allowing them to stream music directly from smartphones, tablets, and other devices with ease. Additionally, multiple inputs, including optical and coaxial connections, are available, ensuring compatibility with other audio sources such as TVs, gaming consoles, and CD players.

Incorporating cutting-edge technologies, the Dantax LR-8500 features advanced digital signal processing (DSP). This technology enhances sound quality by optimizing audio performance for different genres and environments. Users can choose from various preset modes, enabling them to enjoy a tailored sound experience whether they’re listening to music, watching movies, or playing video games.

The design of the LR-8500 reflects a commitment to both aesthetic appeal and functionality. The sleek, modern look fits seamlessly into any home décor while providing intuitive controls for easy operation. The illuminated display screen offers clear visibility, making it simple to navigate settings and features, even in low light.

Moreover, the Dantax LR-8500 is energy-efficient, ensuring that high performance does not come at the expense of excessive power consumption. This consideration demonstrates Dantax's commitment to sustainability while providing users with a premium audio experience.

In conclusion, the Dantax LR-8500 stands out due to its robust features, modern technology, and elegant design. Ideal for a range of users, it embodies the perfect blend of quality, performance, and versatility in the competitive audio market. Whether for casual enjoyment or serious listening sessions, the LR-8500 offers an audio experience that is hard to match.
Top Page Image Contents