Graco 309572ZAF important safety instructions Power-LockHeated Hose

Page 1

Instructions - Parts

Power-Lock™Heated Hose

309572ZAF

EN

For use with plural component proportioners. For professional use only. Not approved for use in European explosive atmospheres.

See page 3 for Maximum Fluid Working Pressure

130 psi (0.9 MPa, 9 bar) Maximum Air Working Pressure

180°F (82°C) Maximum Hose Operating Temperature

Important Safety instructions.

Read all warnings and instructions in this manual. Save these instructions. See page 3 for a list of part numbers.

TI12157a

Image 1

Contents Important Safety instructions Power-LockHeated HoseContents Whip Hoses Power-Lock Hose Bundle Part NumbersAdapter Fittings RTD 2-Component Hose for use with GCA Controlled Reactors Standard 2 Component HoseCustom Application 2 Component Hose Airless 2 Component HoseGuard Cable Outlet m Red Hose Blue Hose In. mm Standard Hose Fittings Braided LengthFTS kits contain Fluid Temperature Sensor FTS KitsSide Inlet Outlet FTS Probe Psi 34.5 MPa, 345 bar SideElectric Shock Hazard Toxic Fluid or Fumes Hazard Material Self-ignition Isocyanate ConditionsKeep Components a and B Separate Foam Resins with 245 fa Blowing Agents Moisture Sensitivity IsocyanatesChanging Materials Description InstallationConnect Whip Hose to Gun or Gun Manifold Connect Heated Hoses Incorrect Correct Strip LengthInsert Wire and Setscrew For non-RTD hoses only, connect cables Installation 309572ZAF For 1/2 in mm ID fluid hoses Connect FTS and Heated Dual Whip HoseSee Check Hoses for Leaks, RTD 2-Component Hoses Non-RTD HosesProportioner To Mix Manifold or non-heated whip hose Check Hoses for Leaks Protective Covering Operation Fluid Temperature Sensor FTS CalibrationInstructions for Replacing Individual a or B Hose MaintenanceWhip Hose Fluid Temperature Sensor Using 261669 Fluid Temperature Sensor JIC to JIC fittingsParts Heated Fluid HoseRef. Part Description Qty Using 24M943 Fluid Temperature Sensor NPT to NPT fittingsCoupler Fluid Temperature Sensor Whip HoseHOSE, air 3.75 in .3 mm Fluid Temperature Sensor Heated Fluid Hose Using 261670 Fluid Temperature Sensor JIC to NPT fittingsPart Description Qty Fluid Temperature 15F144 Hose Wire JumperSingle Side Heated Tap Terminal Hose Length, ft m Label ft Scuff Guard AccessoriesPart Description Power-Lock Heated Hose Metric Technical DataWhip Hose Maximum Fluid Working Pressure Standard 2 Component Hose Maximum Fluid Working PressureFTS Maximum Fluid Working Pressure Airless 2 Component Hose Maximum Fluid Working PressureFTS For GCA Systems Maximum Fluid Working Pressure Technical Data 309572ZAF Graco Information Graco Standard WarrantyUtor closest to you 1-800-328-0211 Toll Free