Graco 309572ZAF important safety instructions Protective Covering

Page 22

Installation

Protective Covering

1.Wrap all fluid hose connections with electri- cal tape.

TI2681A

FIG. 15

2.Fold wire back on hose to ensure adequate strain relief. Wrap all electrical connections and cable connections with electrical tape to protect them from pulling apart and abra- sion.

Leave CAN cable connector (if used) accessible at whip hose joint for connec- tor to the Remote Display Module Kit (if ordered).

3.Install protective cover (see Accessories, page 32), or wrap hose bundle with duct tape to protect foam.

4.For hoses that include the standard braided protective scuff cover, unroll excess cover over hose and electrical connections. Tape securely.

5.For hoses that include Xtreme-Wrap pro- tective scuff sleeve, pull just enough excess length over hose and electrical con- nections. Tape securely.

NOTE: Xtreme-Wrap protective scuff sleeve will contract when heated. Use only as much length as necessary to cover connections and allow excess to remain slack.

309572ZAF

Image 22

Contents Power-LockHeated Hose Important Safety instructionsContents Whip Hoses Power-Lock Hose Bundle Part NumbersAdapter Fittings Standard 2 Component Hose RTD 2-Component Hose for use with GCA Controlled ReactorsGuard Cable Outlet m Red Hose Blue Hose Airless 2 Component HoseCustom Application 2 Component Hose In. mm Standard Hose Fittings Braided LengthSide Inlet Outlet FTS Probe Psi 34.5 MPa, 345 bar Fluid Temperature Sensor FTS KitsFTS kits contain SideElectric Shock Hazard Toxic Fluid or Fumes Hazard Material Self-ignition Isocyanate ConditionsKeep Components a and B Separate Foam Resins with 245 fa Blowing Agents Moisture Sensitivity IsocyanatesChanging Materials Installation DescriptionConnect Whip Hose to Gun or Gun Manifold Connect Heated Hoses Strip Length Incorrect CorrectInsert Wire and Setscrew For non-RTD hoses only, connect cables Installation 309572ZAF For 1/2 in mm ID fluid hoses Connect FTS and Heated Dual Whip HoseSee Check Hoses for Leaks, Non-RTD Hoses RTD 2-Component HosesProportioner To Mix Manifold or non-heated whip hose Check Hoses for Leaks Protective Covering Fluid Temperature Sensor FTS Calibration OperationMaintenance Instructions for Replacing Individual a or B HoseParts Using 261669 Fluid Temperature Sensor JIC to JIC fittingsWhip Hose Fluid Temperature Sensor Heated Fluid HoseUsing 24M943 Fluid Temperature Sensor NPT to NPT fittings Ref. Part Description QtyFluid Temperature Sensor Whip Hose CouplerHOSE, air 3.75 in .3 mm Fluid Temperature Sensor Heated Fluid Hose Using 261670 Fluid Temperature Sensor JIC to NPT fittingsPart Description Qty 15F144 Hose Wire Jumper Fluid TemperatureSingle Side Heated Tap Terminal Hose Length, ft m Label ft Scuff Guard AccessoriesPart Description Whip Hose Maximum Fluid Working Pressure Technical DataPower-Lock Heated Hose Metric Standard 2 Component Hose Maximum Fluid Working PressureFTS Maximum Fluid Working Pressure Airless 2 Component Hose Maximum Fluid Working PressureFTS For GCA Systems Maximum Fluid Working Pressure Technical Data 309572ZAF Graco Information Graco Standard WarrantyUtor closest to you 1-800-328-0211 Toll Free

309572ZAF specifications

The Graco 309572ZAF is a versatile and advanced airless paint sprayer that stands out in the world of home improvement and professional painting. Designed for both DIY enthusiasts and experienced contractors, this model offers a range of features and technologies that make painting projects more efficient and effective.

One of the defining characteristics of the Graco 309572ZAF is its powerful motor. With a robust output, this sprayer can handle a variety of materials, including interior and exterior paints, stains, and sealers. The high-pressure system allows users to achieve a smooth, even finish, regardless of the surface being painted. Whether you are working on walls, fences, or furniture, this sprayer provides exceptional coverage and minimizes the need for multiple coats.

The user-friendly design of the Graco 309572ZAF is another significant advantage. It features an easy-to-load paint container, which eliminates the hassle often associated with traditional paint application methods. Additionally, the lightweight construction allows for extended use without excessive fatigue, making it an ideal choice for larger projects. The adjustable pressure settings enable users to tailor the spray output to their specific needs, ensuring impeccable results for both thick and thin materials.

A remarkable technology incorporated in the Graco 309572ZAF is its patented ProConnect pump replacement system. This feature allows for quick and easy pump replacement, reducing downtime during projects. The integrated Rac X tip design enhances precision application, with an array of available tips to accommodate different spraying needs. This ensures that users can produce fine lines, broad strokes, and everything in between.

Moreover, the Graco 309572ZAF comes with a flexible suction tube that allows for spraying directly from a 1-gallon or 5-gallon paint container, adding convenience and versatility to the painting process. The unit's durability is evidenced by its solid construction, designed to withstand the rigors of job sites while remaining easy to transport.

In conclusion, the Graco 309572ZAF airless paint sprayer is an excellent investment for anyone looking to streamline their painting tasks. Its powerful motor, user-friendly features, advanced technologies, and versatility make it a go-to choice for achieving professional-quality finishes with ease. Whether you're painting a single room or tackling a large project, the Graco 309572ZAF stands ready to deliver outstanding results with minimal effort.