Graco 309572ZAF Connect FTS and Heated Dual Whip Hose, For 1/2 in mm ID fluid hoses

Page 18

Installation

Connect FTS and Heated Dual Whip Hose

NOTICE

To prevent damage to probe, do not kink or excessively bend hose. Do not coil hose tighter than the minimum bend radius of 3 ft (0.9 m). Do not subject hose to excessive weight, impact, or other abuse.

See FIG. 13 on page 19.

For 1/2 in. (13 mm) ID fluid hoses

only: Prior to connecting the FTS, remove the adapters from the propor- tioner fluid manifold and install them on the male ends of the hoses (1 and 2). Torque the A side hose to a maximum of 43 ft-lbs (58 N•m) and the B side hose to a maximum of 55 ft-lbs (74 N•m). Continue on to step 1.

1.Assemble JIC swivel fitting (5e) in female end of temp sensor (5a). Do not bend or kink probe. Torque connection to 14 ft-lbs (19 N•m). Do not over-torque. Assemble JIC swivel fitting (5d) into female end of B hose coupler (5b). Torque to a maximum of 20 ft-lbs (27 N•m). Do not over-torque.

2.Carefully inset FTS probe into the A hose

(1) section from the proportioner. Do not bend or kink probe. Connect to A side whip (6a). Torque fitting connections to 14 ft-lbs (19 N•m). Do not over-torque.

3.Connect the B hose coupler to the B hose section (2) and B side whip (6b). Torque fit- ting connections to 20 ft-lbs (27 N•m). Do not over-torque.

4.Connect ground wire (K) of whip hose to the ground screw on the FTS (5a).

A grounding wire must be used to provide grounding.

Whip hose ground wire (K) must be connected to the ground screw on the FTS (5a) in order to drain static from the gun. If the FTS is not directly connected to the whip hose, a hose that includes a separate ground wire must be used between the FTS and whip hose. Con- nect ground through a hose marked as not having the FTS cable selected from the “Standard 2 Component Hose” table in the front of this manual.

5.Connect the electrical connectors (12).

6.Connect the FTS air line coupler (5c) between air hoses (3 and 8).

7.Connect the sensor cable of the hose (4) to the sensor cable of the FTS (5a). For non-RTD hoses, slide the insulator sleeves

(S) over the connection. Leave slack in the cables to provide stress relief and to pre- vent cable failure or errors.

8.See Check Hoses for Leaks, page 21.

18

309572ZAF

Page 17 Page 19
Image 18
Page 17 Page 19
Contents Power-LockHeated Hose Important Safety instructionsContents Power-Lock Hose Bundle Part Numbers Whip HosesAdapter Fittings Standard 2 Component Hose RTD 2-Component Hose for use with GCA Controlled ReactorsGuard Cable Outlet m Red Hose Blue Hose Airless 2 Component HoseCustom Application 2 Component Hose In. mm Standard Hose Fittings Braided LengthSide Inlet Outlet FTS Probe Psi 34.5 MPa, 345 bar Fluid Temperature Sensor FTS KitsFTS kits contain SideElectric Shock Hazard Toxic Fluid or Fumes Hazard Isocyanate Conditions Material Self-ignitionKeep Components a and B Separate Moisture Sensitivity Isocyanates Foam Resins with 245 fa Blowing AgentsChanging Materials Installation DescriptionConnect Whip Hose to Gun or Gun Manifold Connect Heated Hoses Strip Length Incorrect CorrectInsert Wire and Setscrew For non-RTD hoses only, connect cables Installation 309572ZAF Connect FTS and Heated Dual Whip Hose For 1/2 in mm ID fluid hosesSee Check Hoses for Leaks, Non-RTD Hoses RTD 2-Component HosesProportioner To Mix Manifold or non-heated whip hose Check Hoses for Leaks Protective Covering Fluid Temperature Sensor FTS Calibration OperationMaintenance Instructions for Replacing Individual a or B HoseParts Using 261669 Fluid Temperature Sensor JIC to JIC fittingsWhip Hose Fluid Temperature Sensor Heated Fluid HoseUsing 24M943 Fluid Temperature Sensor NPT to NPT fittings Ref. Part Description QtyFluid Temperature Sensor Whip Hose CouplerHOSE, air 3.75 in .3 mm Using 261670 Fluid Temperature Sensor JIC to NPT fittings Fluid Temperature Sensor Heated Fluid HosePart Description Qty 15F144 Hose Wire Jumper Fluid TemperatureSingle Side Heated Tap Terminal Hose Length, ft m Label ft Accessories Scuff GuardPart Description Whip Hose Maximum Fluid Working Pressure Technical DataPower-Lock Heated Hose Metric Standard 2 Component Hose Maximum Fluid Working PressureAirless 2 Component Hose Maximum Fluid Working Pressure FTS Maximum Fluid Working PressureFTS For GCA Systems Maximum Fluid Working Pressure Technical Data 309572ZAF Graco Standard Warranty Graco InformationUtor closest to you 1-800-328-0211 Toll Free

309572ZAF specifications

The Graco 309572ZAF is a versatile and advanced airless paint sprayer that stands out in the world of home improvement and professional painting. Designed for both DIY enthusiasts and experienced contractors, this model offers a range of features and technologies that make painting projects more efficient and effective.

One of the defining characteristics of the Graco 309572ZAF is its powerful motor. With a robust output, this sprayer can handle a variety of materials, including interior and exterior paints, stains, and sealers. The high-pressure system allows users to achieve a smooth, even finish, regardless of the surface being painted. Whether you are working on walls, fences, or furniture, this sprayer provides exceptional coverage and minimizes the need for multiple coats.

The user-friendly design of the Graco 309572ZAF is another significant advantage. It features an easy-to-load paint container, which eliminates the hassle often associated with traditional paint application methods. Additionally, the lightweight construction allows for extended use without excessive fatigue, making it an ideal choice for larger projects. The adjustable pressure settings enable users to tailor the spray output to their specific needs, ensuring impeccable results for both thick and thin materials.

A remarkable technology incorporated in the Graco 309572ZAF is its patented ProConnect pump replacement system. This feature allows for quick and easy pump replacement, reducing downtime during projects. The integrated Rac X tip design enhances precision application, with an array of available tips to accommodate different spraying needs. This ensures that users can produce fine lines, broad strokes, and everything in between.

Moreover, the Graco 309572ZAF comes with a flexible suction tube that allows for spraying directly from a 1-gallon or 5-gallon paint container, adding convenience and versatility to the painting process. The unit's durability is evidenced by its solid construction, designed to withstand the rigors of job sites while remaining easy to transport.

In conclusion, the Graco 309572ZAF airless paint sprayer is an excellent investment for anyone looking to streamline their painting tasks. Its powerful motor, user-friendly features, advanced technologies, and versatility make it a go-to choice for achieving professional-quality finishes with ease. Whether you're painting a single room or tackling a large project, the Graco 309572ZAF stands ready to deliver outstanding results with minimal effort.
Top Page Image Contents