Graco 309572ZAF Moisture Sensitivity Isocyanates, Foam Resins with 245 fa Blowing Agents

Page 10

Important Two-Component Material Information

Moisture Sensitivity of

Isocyanates

Isocyanates (ISO) are catalysts used in two component foam and polyurea coatings. ISO will react with moisture (such as humidity) to form small, hard, abrasive crystals, which become suspended in the fluid. Eventually a film will form on the surface and the ISO will begin to gel, increasing in viscosity. If used, this partially cured ISO will reduce performance and the life of all wetted parts.

NOTE: The amount of film formation and rate of crystal- lization varies depending on the blend of ISO, the humidity, and the temperature.

To prevent exposing ISO to moisture:

•Always use a sealed container with a desiccant dryer in the vent, or a nitrogen atmosphere. Never store ISO in an open container.

•Keep the ISO lube pump reservoir (if installed) filled with Graco® Throat Seal Liquid (TSL™), Part 206995. The lubricant creates a barrier between the ISO and the atmosphere.

•Use moisture-proof hoses specifically designed for ISO, such as those supplied with your system.

•Never use reclaimed solvents, which may contain moisture. Always keep solvent containers closed when not in use.

•Never use solvent on one side if it has been con- taminated from the other side.

•Always lubricate threaded parts with ISO pump oil or grease when reassembling.

Foam Resins with 245 fa Blowing Agents

Some foam blowing agents will froth at temperatures above 90°F (33°C) when not under pressure, especially if agitated. To reduce frothing, minimize preheating in a circulation system.

Changing Materials

•When changing materials, flush the equipment mul- tiple times to ensure it is thoroughly clean.

•Always clean the fluid inlet strainers after flushing.

•Check with your material manufacturer for chemical compatibility.

•Most materials use ISO on the A side, but some use ISO on the B side.

•Epoxies often have amines on the B (hardener) side. Polyureas often have amines on the B (resin) side.

10

309572ZAF

Page 9 Page 11
Image 10
Page 9 Page 11
Contents Power-LockHeated Hose Important Safety instructionsContents Whip Hoses Power-Lock Hose Bundle Part NumbersAdapter Fittings Standard 2 Component Hose RTD 2-Component Hose for use with GCA Controlled ReactorsGuard Cable Outlet m Red Hose Blue Hose Airless 2 Component HoseCustom Application 2 Component Hose In. mm Standard Hose Fittings Braided LengthSide Inlet Outlet FTS Probe Psi 34.5 MPa, 345 bar Fluid Temperature Sensor FTS KitsFTS kits contain SideElectric Shock Hazard Toxic Fluid or Fumes Hazard Material Self-ignition Isocyanate ConditionsKeep Components a and B Separate Foam Resins with 245 fa Blowing Agents Moisture Sensitivity IsocyanatesChanging Materials Installation DescriptionConnect Whip Hose to Gun or Gun Manifold Connect Heated Hoses Strip Length Incorrect CorrectInsert Wire and Setscrew For non-RTD hoses only, connect cables Installation 309572ZAF For 1/2 in mm ID fluid hoses Connect FTS and Heated Dual Whip HoseSee Check Hoses for Leaks, Non-RTD Hoses RTD 2-Component HosesProportioner To Mix Manifold or non-heated whip hose Check Hoses for Leaks Protective Covering Fluid Temperature Sensor FTS Calibration OperationMaintenance Instructions for Replacing Individual a or B HoseParts Using 261669 Fluid Temperature Sensor JIC to JIC fittingsWhip Hose Fluid Temperature Sensor Heated Fluid HoseUsing 24M943 Fluid Temperature Sensor NPT to NPT fittings Ref. Part Description QtyFluid Temperature Sensor Whip Hose CouplerHOSE, air 3.75 in .3 mm Fluid Temperature Sensor Heated Fluid Hose Using 261670 Fluid Temperature Sensor JIC to NPT fittingsPart Description Qty 15F144 Hose Wire Jumper Fluid TemperatureSingle Side Heated Tap Terminal Hose Length, ft m Label ft Scuff Guard AccessoriesPart Description Whip Hose Maximum Fluid Working Pressure Technical DataPower-Lock Heated Hose Metric Standard 2 Component Hose Maximum Fluid Working PressureFTS Maximum Fluid Working Pressure Airless 2 Component Hose Maximum Fluid Working PressureFTS For GCA Systems Maximum Fluid Working Pressure Technical Data 309572ZAF Graco Information Graco Standard WarrantyUtor closest to you 1-800-328-0211 Toll Free

309572ZAF specifications

The Graco 309572ZAF is a versatile and advanced airless paint sprayer that stands out in the world of home improvement and professional painting. Designed for both DIY enthusiasts and experienced contractors, this model offers a range of features and technologies that make painting projects more efficient and effective.

One of the defining characteristics of the Graco 309572ZAF is its powerful motor. With a robust output, this sprayer can handle a variety of materials, including interior and exterior paints, stains, and sealers. The high-pressure system allows users to achieve a smooth, even finish, regardless of the surface being painted. Whether you are working on walls, fences, or furniture, this sprayer provides exceptional coverage and minimizes the need for multiple coats.

The user-friendly design of the Graco 309572ZAF is another significant advantage. It features an easy-to-load paint container, which eliminates the hassle often associated with traditional paint application methods. Additionally, the lightweight construction allows for extended use without excessive fatigue, making it an ideal choice for larger projects. The adjustable pressure settings enable users to tailor the spray output to their specific needs, ensuring impeccable results for both thick and thin materials.

A remarkable technology incorporated in the Graco 309572ZAF is its patented ProConnect pump replacement system. This feature allows for quick and easy pump replacement, reducing downtime during projects. The integrated Rac X tip design enhances precision application, with an array of available tips to accommodate different spraying needs. This ensures that users can produce fine lines, broad strokes, and everything in between.

Moreover, the Graco 309572ZAF comes with a flexible suction tube that allows for spraying directly from a 1-gallon or 5-gallon paint container, adding convenience and versatility to the painting process. The unit's durability is evidenced by its solid construction, designed to withstand the rigors of job sites while remaining easy to transport.

In conclusion, the Graco 309572ZAF airless paint sprayer is an excellent investment for anyone looking to streamline their painting tasks. Its powerful motor, user-friendly features, advanced technologies, and versatility make it a go-to choice for achieving professional-quality finishes with ease. Whether you're painting a single room or tackling a large project, the Graco 309572ZAF stands ready to deliver outstanding results with minimal effort.
Top Page Image Contents