Canon N650U Verify Image Quality with the Browser Function before, Mouse pointer over the image

Ad

Page 11

4	Set the Scan Mode, Output Device, Resolution and
	Magnification	pp. 18-22

• Scanning mode determines how the image is scanned (p. 21).

•Output device setting optimizes the images for particular uses (p. 18).

•Resolution determines the amount of detail in the scanned image (p. 19).

•Magnification determines the amount of enlargement or reduction of the output image display (p. 19).

5	Verify Image Quality with the Browser Function before
	Scanning	p. 23

1. Click on the [Browser] button.

• The selection frame will appear.

Selection Frame

The selection frame moves with the mouse pointer.

2.Move the selection frame to specify the area of the image you want verified and click the mouse button.

•Plug-in Module CS-U will read the image and display the browser image.

3.After you have examined the browser image, click the mouse anywhere.

6	Specify the Area of the Image to be Scanned		p. 30
	Select the area to be scanned by clicking and dragging the

mouse pointer over the image.

•You may find it convenient to use the zoom feature to select small areas or to select specific scan areas with precision (p. 31).

11

Image 11

Contents Users Guide When you open the box How to Make Best Use of the ManualsAbout the Conventions Used in this Guide How to Use this GuideWhere to Look Table of Contents Adjusting Scanned Images Operating Environment Installing Plug-in Module CS-UImage Size pp Control Panel FeaturesE P Scanning ProceduresColorSync Ver 2.0 + Compatible for Auto Tone Correction Plug-in Module CS-U Special FeaturesSee the Results of Adjustments Immediately Dynamic Preview Gamma Curve Adjusts Image BrightnessPosition materials for scanning and preview them Install Plug-in Module CS-UQuick Start Instructions Start Plug-in Module CS-USelect the area to be scanned by clicking and dragging Verify Image Quality with the Browser Function beforeSpecify the Area of the Image to be Scanned Click on the Browser button Selection frame will appearSave the Scanned Image p Scan the Image pE P RGB Values Displaying the Plug-in Module CS-U Control PanelOperating Procedures Place the original on the scanners document glass ProceduresPositioning Originals Click on the Preview button PreviewingSelecting the Output Device Output Device Resolution= 720 dpi, Magnification= 100% Setting the Resolution and MagnificationSet the desired magnification factor on the control panel To Set the Magnification FactorColor Documents Setting the Scan ModeBlack and White GrayscaleSelect a scan mode from the pop-up menu Click the arrow beside Scan ModeTo Verify the Image Verifying the Image before ScanningUse these buttons to rotate the image Rotating the ImageAspect Ratio Setting PreferencesOutput Device Preview Window UnitClose Plug-in After Scan Reset Default SettingsCalibration Operating Procedures Scanning Position the pointer in the preview window Setting the Scan AreaSelect the area you want to enlarge with the zoom function Procedures to ZoomZooming Click on the Zoom In button Click on the Scan button ScanningTo Initiate the Scan Specify the Scan AreaEnter a name for the file and click the Save button Saving Scanned ImagesColor Photos and Color Documents Grayscale, Color Photos and Color DocumentsBlack & White Tone Adjustment Dialog Tone AdjustmentHow to Interpret Histograms Histogram SettingsHow to Adjust Histograms To Adjust a HistogramShadow Mark Click on the OK buttonManipulating the Graph Tone Curve SettingsClick the OK button To Edit the Tone CurveValue = Relationship Between the Tone Curve Image BrightnessBrightness Brightness and Contrast SettingsContrast To Adjust the Brightness and Contrast Operating Procedure Adjusting the Color BalanceGamma value Gamma Value SettingsMatching the Gamma Value to the Display Characteristics To Change the Gamma Value Settings To Set the Threshold Value Adjusting the Threshold ValueColorSync Auto Tone CorrectionTo Set the Auto Tone Correction StandardOpen the Image menu and select Unsharp Mask Unsharp MaskOpen the Image menu and select Descreen DescreenClick the Save button Saving/Recalling SettingsTo Save Settings in a Settings File To Recall a Settings File Scanning Techniques Matching Scan Resolution to PurposeOptical and Enhanced Resolutions Appendices Troubleshooting Problem Scan button cannot be selected Response Error MessagesError Message CauseBlack Eyedropper Tool GlossaryAuto Tone Correction Bits/Bit NumbersDot Color ChannelMagnification HistogramImage File Pixel Optical ResolutionResolution MoiréTone Curve Scan ModeShadows Threshold ValueOutput device 7, 11, 18, 25 IndexPage Canon Computer SYSTEMS, INC Canon Customer Support Help DeskOE-040AA 052000 CDS Canon Inc