Casio K855PCM1DMX manual If the camera works normally, If the camera does not work normally

Page 30

GETTING READY

■If the camera works normally

1.Continue using the camera until the current charge is used up, and then charge the battery.

■If the camera does not work normally

This can mean there is a problem with how the battery is loaded.

1.Remove the battery from the camera and check the battery contacts for dirt. If the contacts are dirty, wipe them clean with a dry cloth.

2.Check to make sure that the AC adaptor’s power cord is connected securely to the power outlet and USB cradle.

•If the same symptoms occur again when you place the camera on the USB cradle after taking the above steps, contact a CASIO authorized service center.

■Battery Life Guidelines

The battery life guideline values given below indicate the amount of time at standard temperature (25° C (77° F)) until power automatically turns off due to battery failure. They do not guarantee that the battery will provide the amount of service indicated. Low temperatures and continued use reduce battery life.

	Operation	Approximate Battery Life

	Continuous Recording*1	75 minutes (450 shots)
	(Continuous Snapshot Recording)	75 minutes (450 shots)
	(Continuous Snapshot Recording)

	Continuous Playback*2	120 minutes

Supported Battery: NP-20 (Rated Capacitance: 680mAh)

*1 Continuous Recording Conditions

•Normal temperature: 25° C (77° F)

•Flash: Off

•Monitor screen: On

•Image recorded about every 10 seconds using the following operations: Zoom to full wide angle Auto Focus Zoom to full close-up Auto Focus Image recording

*2 Continuous Playback Conditions

•Normal temperature: 25° C (77° F)

•Scroll one image about every 10 seconds

30

Image 30

Contents EX-Z3 Introduction UnpackingContents Using the Self-timer Specifying Image Size and Quality Using ZoomUsing the Flash Selecting the Focus ModeDisplaying the Calendar Screen Setting the Clock 112Using World Time 114 Rotating the Display ImageUsing the Camera with a Macintosh Computer 129 Using a Memory Card 119Using the Camera with a Windows Computer 124 Using the Album Feature 139154 Indicator Lamp Reference 156Troubleshooting Guide 159 163Copyright Restrictions Features Introduction General Precautions PrecautionsData Error Precautions Operating conditions CondensationLED Backlight LensOther Place the camera onto the USB cradle to charge the battery First, charge the batteryLoad the battery It takes about two hours to achieve a full chargeTo configure display language and clock settings 4, 5, 6, 7, 8See page 43 for details To record an imageTo view a recorded image See page 80 for detailsTo delete an image Press SET to delete the imageSee page 94 for details Button Operations About This ManualTerminology On-screen TextFront CameraGeneral Guide BackUSB Cradle BottomREC mode Monitor Screen ContentsPlay mode Digital zoom indicator Shutter speed valueChanging the Contents of the Monitor Screen To load the battery Power RequirementsAttaching the Strap Stopper Arrow marks NP-20 Release the stopper and pull the battery from the camera To remove the batteryTo charge the battery Take care so you do not drop the batteryTurn off the camera Set the camera onto the USB cradleGetting Ready Battery Life Guidelines If the camera works normallyIf the camera does not work normally Tip to Make the Battery Last Longer Low Battery IndicatorPower Supply Precautions Battery Handling PrecautionsPrecautions During USE USB Cradle and AC Adaptor Precautions Getting Ready Battery Storage PrecautionsTurning the Camera On and Off Performing any button operation causes Configuring Power Saving SettingsAmount of time in the REC mode Monitor screen to turn back onUsing the On-screen Menus Use and to change the currently selected setting Instead of pressing , you could also press SETConfiguring Display Language and Clock Settings To configure display language and clock settings Set the current date and the time Example October 23Getting Ready Press the power button to turn on the camera Align the mode selector with RECRecording an Image Press the shutter release button half way to focus the image Make sure you are notRecording Precautions About the REC Mode Monitor Screen About Auto FocusUsing the Optical Viewfinder REC mode, press the zoom button to Using ZoomOptical Zoom Change the zoom factorDigital Zoom REC mode, press Menu Press To select Using the FlashFlash mode Each press Cycles through the flashAbout Red-eye Reduction Record the imageFlash Unit Status Red operation lampUsing the Self-timer Selecting Off in disables the self-timerRecord the image To specify the image size Specifying Image Size and QualityTo specify image quality