Casio K855PCM1DMX manual Digital Zoom

Page 49

BASIC IMAGE RECORDING

Digital Zoom

Digital zoom is activated after you reach the maximum optical zoom factor (3X). It enlarges the part of the image at the center of the image screen. The range of the digital zoom factor is shown below.

Digital Zoom Factor Range: 3X to 12X

(in combination with optical zoom)

1.

In the REC mode, press [MENU].

2.

Use [￿] and [￿] to select the “REC” tab.

5.Hold down the (Telephoto) zoom button to increase the optical zoom factor.

When the digital zoom factor reaches its maximum value (3X), it

stops momentarily. Keep

the (Telephoto) zoom button depressed and zoom will switch over to digital zoom automatically.

Digital zoom indicator

Zoom indicator

3.

Use [￿] and [￿] to select “Digital Zoom”, and

 

then press [￿].

4.

Select “On”, and then press [SET].

 

• Selecting “Off” disables digital zoom.

Switching to digital zoom causes the zoom indicator to appear on the monitor screen. The zoom indicator shows the current approximate zoom factor.

Digital

Optical Zoom Zoom

 

 

 

 

 

 

 

 

 

 

 

 

 

 

1x

3x

 

12x

 

 

Current zoom factor

 

 

6.Compose the image and then press the shutter release button.

49

Image 49
Contents EX-Z3 Unpacking IntroductionContents Using the Flash Using ZoomUsing the Self-timer Specifying Image Size and Quality Selecting the Focus ModeUsing World Time 114 Setting the Clock 112Displaying the Calendar Screen Rotating the Display ImageUsing the Camera with a Windows Computer 124 Using a Memory Card 119Using the Camera with a Macintosh Computer 129 Using the Album Feature 139Troubleshooting Guide 159 Indicator Lamp Reference 156154 163Copyright Restrictions Features Introduction Precautions General PrecautionsData Error Precautions Condensation Operating conditionsLens LED BacklightOther Load the battery First, charge the batteryPlace the camera onto the USB cradle to charge the battery It takes about two hours to achieve a full charge4, 5, 6, 7, 8 To configure display language and clock settingsTo view a recorded image To record an imageSee page 43 for details See page 80 for detailsPress SET to delete the image To delete an imageSee page 94 for details Terminology About This ManualButton Operations On-screen TextGeneral Guide CameraFront BackBottom USB CradleMonitor Screen Contents REC modeDigital zoom indicator Shutter speed value Play modeChanging the Contents of the Monitor Screen Power Requirements To load the batteryAttaching the Strap Stopper Arrow marks NP-20 To charge the battery To remove the batteryRelease the stopper and pull the battery from the camera Take care so you do not drop the batterySet the camera onto the USB cradle Turn off the cameraGetting Ready If the camera works normally Battery Life GuidelinesIf the camera does not work normally Low Battery Indicator Tip to Make the Battery Last LongerBattery Handling Precautions Power Supply PrecautionsPrecautions During USE Getting Ready Battery Storage Precautions USB Cradle and AC Adaptor PrecautionsTurning the Camera On and Off Amount of time in the REC mode Configuring Power Saving SettingsPerforming any button operation causes Monitor screen to turn back onUsing the On-screen Menus Instead of pressing , you could also press SET Use and to change the currently selected settingConfiguring Display Language and Clock Settings To configure display language and clock settings Example October 23 Set the current date and the timeGetting Ready Align the mode selector with REC Press the power button to turn on the cameraRecording an Image Make sure you are not Press the shutter release button half way to focus the imageRecording Precautions About Auto Focus About the REC Mode Monitor ScreenUsing the Optical Viewfinder Optical Zoom Using ZoomREC mode, press the zoom button to Change the zoom factorDigital Zoom Flash mode Using the FlashREC mode, press Menu Press To select Each press Cycles through the flashRecord the image About Red-eye ReductionRed operation lamp Flash Unit StatusSelecting Off in disables the self-timer Using the Self-timerRecord the image Specifying Image Size and Quality To specify the image sizeTo specify image quality