Casio K855PCM1DMX manual Use and to change the currently selected setting

Page 38

GETTING READY

●Menu Screen Operations

When you want to do this:	Do this:
Move between tabs	Press [	] and [	].

Move from the tab to the	Press [	].
settings	Press [	].
settings

Move from the settings to	Press [	].
the tab	Press [	].
the tab

Move between the settings	Press [	] and [	].

Display the options	Press [	] or press [SET].
	Press [	] or press [SET].

3.Press [ ] or [ ] to select the tab you want, and then press [SET] to move the selection cursor from the tab to the settings.

4.Use [ ] and [ ] to select the feature whose setting you want to configure, and then press [ ].

available for a setting
Select an option	Press [ ] and [ ].

Register an option
selection and exit the menu	Press [SET].

•Instead of pressing [ ], you could also press [SET].

Example: To select the “REC Mode” item.

screen
Register an option
selection and return to the	Press [ ].
menu screen

Exit the menu screen	Press the [MENU] button.

5.Use [ ] and [ ] to change the currently selected setting.

38

Image 38

Contents

EX-Z3 Introduction UnpackingContents Using the Self-timer Specifying Image Size and Quality Using ZoomUsing the Flash Selecting the Focus ModeDisplaying the Calendar Screen Setting the Clock 112Using World Time 114 Rotating the Display ImageUsing the Camera with a Macintosh Computer 129 Using a Memory Card 119Using the Camera with a Windows Computer 124 Using the Album Feature 139154 Indicator Lamp Reference 156Troubleshooting Guide 159 163Copyright Restrictions Features Introduction General Precautions PrecautionsData Error Precautions Operating conditions CondensationOther LED BacklightLens Place the camera onto the USB cradle to charge the battery First, charge the batteryLoad the battery It takes about two hours to achieve a full chargeTo configure display language and clock settings 4, 5, 6, 7, 8See page 43 for details To record an imageTo view a recorded image See page 80 for detailsSee page 94 for details To delete an imagePress SET to delete the image Button Operations About This ManualTerminology On-screen TextFront CameraGeneral Guide BackUSB Cradle BottomREC mode Monitor Screen ContentsPlay mode Digital zoom indicator Shutter speed valueChanging the Contents of the Monitor Screen Attaching the Strap To load the batteryPower Requirements Stopper Arrow marks NP-20 Release the stopper and pull the battery from the camera To remove the batteryTo charge the battery Take care so you do not drop the batteryTurn off the camera Set the camera onto the USB cradleGetting Ready If the camera does not work normally Battery Life GuidelinesIf the camera works normally Tip to Make the Battery Last Longer Low Battery IndicatorPower Supply Precautions Battery Handling PrecautionsPrecautions During USE USB Cradle and AC Adaptor Precautions Getting Ready Battery Storage PrecautionsTurning the Camera On and Off Performing any button operation causes Configuring Power Saving SettingsAmount of time in the REC mode Monitor screen to turn back onUsing the On-screen Menus Use and to change the currently selected setting Instead of pressing , you could also press SETConfiguring Display Language and Clock Settings To configure display language and clock settings Set the current date and the time Example October 23Getting Ready Recording an Image Press the power button to turn on the cameraAlign the mode selector with REC Press the shutter release button half way to focus the image Make sure you are notRecording Precautions About the REC Mode Monitor Screen About Auto FocusUsing the Optical Viewfinder REC mode, press the zoom button to Using ZoomOptical Zoom Change the zoom factorDigital Zoom REC mode, press Menu Press To select Using the FlashFlash mode Each press Cycles through the flashAbout Red-eye Reduction Record the imageFlash Unit Status Red operation lampUsing the Self-timer Selecting Off in disables the self-timerRecord the image To specify the image size Specifying Image Size and QualityTo specify image quality