Casio K855PCM1DMX manual Configuring Power Saving Settings, Amount of time in the REC mode

Page 36

GETTING READY

Configuring Power Saving Settings

You can configure the settings described below to conserve battery power.

Sleep	: Automatically turns off the monitor screen
	if no operation is performed for a specified
	amount of time in the REC mode.
	Performing any button operation causes
	the monitor screen to turn back on.

Auto Power Off : Turns off power if you do not perform any operation for a specified amount of time.

1.Turn on the camera, and then align the mode selector with “REC” or “PLAY”.

2.Press [MENU].

3.Use [ ] and [ ] to select the “Set Up” tab.

4.Use [ ] and [ ] to select the feature whose setting you want to configure, and then press [SET].

●See page 37 for information about how to use menus.

To configure this feature:	Select this setting:

Sleep	Sleep

Auto Power Off	Auto Power Off

5.Use [ ] and [ ] to change the currently selected setting, and then press [SET].

•Available Sleep settings are: “30 sec”, “1 min”, “2 min”, and “Off”.

•Available Auto Power Off settings are: “2 min” and “5 min”.

•Note that the Sleep feature does not operate in the PLAY mode.

•Pressing any button while the camera is in the Sleep state immediately turns the monitor screen back on.

•The Auto Power Off and Sleep features are disabled in the following cases.

—When the camera is connected to a computer or some other device through the USB cradle

—While a slideshow is in progress

36

Image 36

Contents EX-Z3 Introduction UnpackingContents Using Zoom Using the FlashUsing the Self-timer Specifying Image Size and Quality Selecting the Focus ModeSetting the Clock 112 Using World Time 114Displaying the Calendar Screen Rotating the Display ImageUsing a Memory Card 119 Using the Camera with a Windows Computer 124Using the Camera with a Macintosh Computer 129 Using the Album Feature 139Indicator Lamp Reference 156 Troubleshooting Guide 159154 163Copyright Restrictions Features Introduction General Precautions PrecautionsData Error Precautions Operating conditions CondensationLED Backlight LensOther First, charge the battery Load the batteryPlace the camera onto the USB cradle to charge the battery It takes about two hours to achieve a full chargeTo configure display language and clock settings 4, 5, 6, 7, 8To record an image To view a recorded imageSee page 43 for details See page 80 for detailsTo delete an image Press SET to delete the imageSee page 94 for details About This Manual TerminologyButton Operations On-screen TextCamera General GuideFront BackUSB Cradle BottomREC mode Monitor Screen ContentsPlay mode Digital zoom indicator Shutter speed valueChanging the Contents of the Monitor Screen To load the battery Power RequirementsAttaching the Strap Stopper Arrow marks NP-20 To remove the battery To charge the batteryRelease the stopper and pull the battery from the camera Take care so you do not drop the batteryTurn off the camera Set the camera onto the USB cradleGetting Ready Battery Life Guidelines If the camera works normallyIf the camera does not work normally Tip to Make the Battery Last Longer Low Battery IndicatorPower Supply Precautions Battery Handling PrecautionsPrecautions During USE USB Cradle and AC Adaptor Precautions Getting Ready Battery Storage PrecautionsTurning the Camera On and Off Configuring Power Saving Settings Amount of time in the REC modePerforming any button operation causes Monitor screen to turn back onUsing the On-screen Menus Use and to change the currently selected setting Instead of pressing , you could also press SETConfiguring Display Language and Clock Settings To configure display language and clock settings Set the current date and the time Example October 23Getting Ready Press the power button to turn on the camera Align the mode selector with RECRecording an Image Press the shutter release button half way to focus the image Make sure you are notRecording Precautions About the REC Mode Monitor Screen About Auto FocusUsing the Optical Viewfinder Using Zoom Optical ZoomREC mode, press the zoom button to Change the zoom factorDigital Zoom Using the Flash Flash modeREC mode, press Menu Press To select Each press Cycles through the flashAbout Red-eye Reduction Record the imageFlash Unit Status Red operation lampUsing the Self-timer Selecting Off in disables the self-timerRecord the image To specify the image size Specifying Image Size and QualityTo specify image quality