Yamaha YSP-3000 Installation, Before installing this unit, Installing this unit, 16 En

Page 18

Installation

This section describes a suitable installation location to install this unit using a metal wall bracket, a rack or a stand. Depending on your installation environment, connections with external components can be done before installing this unit. We recommend that you temporarily place and arrange all components, including this unit, in order to decide which procedure should come first. Especially when you make a connection over HDMI, we recommend that you make a connection first before installation (see page 21).

Before installing this unit

This unit creates surround sound by reflecting projected sound beams off the walls of your listening room. The surround sound effects produced by this unit may not be sufficient when this unit is installed in the following locations.

•Rooms with walls inadequate for reflecting sound beams

•Rooms with acoustically absorbent walls

•Rooms with measurements outside the following range: W (3 to 7 m (10 to 23 ft)) x H (2 to 3.5 m (7 to 11.5 ft)) x D (3 to 7 m (10 to 23 ft))

•Rooms with less than 1.8 m (6 ft) from the listening position to this unit

•Rooms where objects such as furniture are likely to obstruct the path of sound beams

•Rooms where the listening position is close to the walls

•Rooms where the listening position is not in front of this unit

y

•You can enjoy surround sound by selecting My Surround (see page 55) as the beam mode even if your listening room may not fulfill the above conditions (except when the listening position is not directly facing toward the front of this unit).

•You can also enjoy surround sound by selecting 2-channel or 5- channel stereo playback (see page 60) or My Beam (see

page 61) as the beam mode even if your listening room may not fulfill the above conditions.

Make sure you leave an adequate amount of ventilation space so that heat can escape. Make at least 5 cm (2 in) of space above or below this unit.

Side view

5 cm (2 in) or more

FrontRear

Notes

•We do not recommend putting this unit directly on the floor of your listening room. Please install this unit using a metal wall bracket, a rack, or a stand.

•This unit weighs 11.5 kg (25 lbs 6 oz). Be sure to install this unit where it will not fall subject to vibrations, such as from an earthquake, and where it is out of the reach of children.

•When using a cathode-ray tube (CRT) TV, do not install this unit directly above your TV.

•This unit is shielded against magnetic rays. However, if the picture on your TV screen becomes blurred or distorted, we recommend moving this unit away from your TV.

Installing this unit

Install this unit where there are no obstacles such as furniture obstructing the path of sound beams. Otherwise, the desired surround sound effects may not be achieved. You may install this unit in parallel with the wall or in the corner.

Parallel installation

Install this unit in the exact center of the wall when it is measured from the left and right corners.

An object, such as furniture

Corner installation

Install this unit in the corner at a 40º to 50º angle from the adjacent walls.

40° to 50°

An object, such as furniture

16 En

Page 17 Page 19
Image 18
Page 17 Page 19
Contents YSP-3000 For U.K. Customers Contents Overview Features Features Using this manual Supplied accessories Check that you have received all of the following partsInput Controls and functionsFront panel STANDBY/ONFront panel display Rear panel Remote control Europe, Australia, Asia, and Korea models 10 En11 En Memory PRESET/TUNE12 En SearchRemote control U.S.A. and Canada models 13 EnSound field program buttons 14 En CAT15 En Cursor buttonsInstalling this unit InstallationBefore installing this unit 16 EnInstallation examples 17 EnExample Using a stand Using a metal wall bracketUsing a rack 18 EnConnections 19 En20 En Connections using Hdmi cables 21 EnHdmi cable OSD video pin cable Audio Optical cable Connecting a TV 22 EnOSD video pin cable Audio pin cable Optical cable Connecting a DVD player/recorder 23 EnAudio pin cable Digital audio pin cable Connecting a digital satellite tuner or a cable TV tuner 24 EnAudio pin cable Optical cable Connecting a digital airwave tuner 25 EnConnecting a portable audio player 26 EnMm stereo mini plug cable Connecting other external components 27 EnAudio pin cable Optical cable Digital audio pin cable Connecting a subwoofer 28 EnAbout the IR in terminal U.S.A. and Canada models only Connecting the FM antennaConnecting the AC power supply cable 29 EnClose the battery cover Installing batteries in the remote controlOperation range of the remote control Getting startedPress STANDBY/ON to turn on the power of this unit VolumePress STANDBY/ON again to set this unit to the standby mode 31 EnUsing SET Menu Displaying the OSD on-screen display32 En Flow chart of SET Menu 33 EnSET Menu Language SetupChanging OSD language 34 EnAuto Setup IntelliBeam Flow chart of Auto Setup35 En Installing the IntelliBeam microphone Press STANDBY/ON to turn off the power of this unit36 En Using Auto Setup IntelliBeam 37 EnAssembling the supplied cardboard Microphone stand Press / to select Auto Setup and press Enter Auto SetupSet the operation mode selector to YSP 38 EnAuto Setup Start 39 EnBEAM+SOUND Optimz Show Result 40 EnCheck that the following screen is displayed on your TV While the Auto Setup procedure is in progress Error messages for Auto SetupBefore the Auto Setup procedure starts 41 En2MEMORY Save Using the system memorySaving settings Memory43 En Loading settingsMemory Press Enter againPress / to select Load and press Press Enter again 1MEMORY Load44 En Press / to select MEMORY1TV/STB Auto PlaybackSelecting the input source DVDPlaying back sources AUX1 AutoAUX3 46 EnDVD 5BEAM Adjusting the volumeAudio Mute Audio Mute OFFFM controls and functions FM tuningRemote control functions 48 EnAutomatic tuning Manual tuning49 En Automatic preset tuning 50 En51 En Manual preset tuningPress Memory while the Memory indicator Is flashing Tune into the desired FM stationA1FM Selecting a preset stationPreset station number 1 to 52 En53 En Tune into the desired Radio Data System broadcasting station54 En Enjoying surround soundBeam Press 5BEAM to select 5 BeamStereo plus 3 Beam My Surround55 En 56 En Decoder indicatorsInput channel indicators Surround modes and recommended sourcesEnjoying 2-channel sources Surround sound57 En Select the TV channel you want to watch Press Volume +/- to adjust the volume level58 En Press TVWhen DTS Neo6 Music is selected Adjusting surround mode parametersWhen Dolby Pro Logic II Music is selected 59 En5CH Stereo Enjoying stereo soundChannel stereo playback 60 En61 En Using auto-adjust functionPlaying back sound clearly My Beam Press and hold MY Beam for more than two secondsAngle Using manual-adjust functionPress / while MY Beam is displayed to adjust the beam angle 62 En63 En Using sound field programsWhat is a sound field? Elements of a sound fieldMusic program Cinema DSP programs64 En Movie programCinema DSP Adjusting Cinema DSP effect levelsDSP Level 65 EnUsing the music enhancer 66 EnPress Enhancer to select the Music Enhancer 67 En NIGHTCINEMA, NIGHTMUSIC, TV EqualUsing the sleep timer Unit to confirm the setting for the sleep timer68 En Canceling the sleep timer Sleep OFF69 En Displaying the input source information 70 EnPress Display Using the Hdmi control feature 71 EnBeam Menu 72 EnSound Menu Input MenuManual Setup Using Manual Setup73 En 2BEAM Menu Setting parametersInstalled Position Installed position of this unit 74 EnBeam Adjustment Beam adjustment 75 EnHorizontal Angle Horizontal angle 76 En Beam Travel Length Beam travel lengthFocal Length Focal length Cimage Location 77 EnImage Location Image location Cmute Level 1SOUND MenuAtone Control 78 EnDaudio Delay Eroom EQ79 En Ainput Assignment Binput Mode3INPUT Menu 80 EnEhdmi SET Hdmi SET Hdmi settingsDinput Rename 81 EnFXM Antenna Level 82 EnXM Antenna Level XM antenna level A. and Canada models only Bosd SET 4DISPLAY MenuAF.DISPLAY SET Cunit SETTest Front Adjusting the audio balanceUsing the test tone 84 EnUsing the audio output being played back 85 En86 En Auto Selecting the input mode87 En DTSProtect Adjusting the system parametersUsing the system parameters 88 EnPress / to switch between Protect on and Protect OFF Protect OFF89 En MAX Volume SET Setting the MAX VolumeSetting the Turn on Volume Press / to adjust the maximum volume levelDemo Mode Turn VolumeSetting the Demo Mode Press / to adjust the initial volume levelDemo OFF Setting the Panel Input KEYDemo Panel Input KEYDisabling the front panel keys Press / to switch between P.INPUT on P.INPUT OFFInput OFF Panel KEYPanel OFF Setting the Factory PresetPanel FactoryPreset Reset Presetcancel Press / to switch between Preset Reset and Preset Cancel95 En 96 En Remote control featuresSetting remote control codes Code SETOperating your TV Controlling other components97 En TV INPUT1Operating your STB CATV/Satellite tuner 98 EnOperating your DVD player/recorder Operation buttons for DVD players99 En Operating your VCROperation buttons for VCR Press Enter to confirm the macro setting Using the TV macroSetting macros for the TV with the tuning capability 100 En101 En Setting macros for the TV without the tuning capabilityCanceling the macros Operating macrosTroubleshooting 102 EnGeneral Problem Cause Remedy 103 EnRemote control 104 EnFM tuner Glossary 105 EnNeural Surround 106 EnLFE 0.1-channel PCM Linear PCMIndex 107 EnNumerics Specifications 108 En109 En Conditions

YSP-3000 specifications

The Yamaha YSP-3000 is a revolutionary digital sound projector that has carved a niche for itself in the realm of home theater audio systems. Launched as a versatile sound solution, the YSP-3000 integrates cutting-edge technology to deliver an immersive audio experience that mimics that of traditional multi-speaker surround sound systems.

One of the main features of the YSP-3000 is its unique Digital Sound Projector technology. It utilizes a series of miniature speakers arranged in an array to create a broad sound stage. This allows the YSP-3000 to project sound around the room, simulating the effect of surround sound without the need for additional speakers positioned throughout the space. The system employs sophisticated digital signal processing, which fine-tunes the audio output to achieve optimal acoustics tailored to the room’s characteristics.

An impressive characteristic of the YSP-3000 is the inclusion of 7-channel surround sound capabilities. This configuration ensures that users receive an immersive audio experience with clear dialogue and rich sound effects, ideal for movies, music, and gaming. The built-in subwoofer further enhances the low-end frequencies, providing deep bass that adds a layer of excitement to any audio playback.

The YSP-3000 also features Yamaha’s proprietary YSP sound field processing, which allows users to choose from multiple sound field modes to match their audio content. From gaming to music listening, users can select the option that best complements their experience. The system also supports various audio codecs including Dolby Digital and DTS, ensuring compatibility with a wide range of media formats.

Connectivity options are another strong point of the YSP-3000. It includes multiple HDMI inputs, enabling seamless integration with various devices such as Blu-ray players and gaming consoles. Additionally, it features optical and analog audio inputs, making it versatile enough for older audio devices. The included remote control offers intuitive navigation through settings and modes, making operation easy for users of all levels.

Overall, the Yamaha YSP-3000 stands out as a user-friendly and feature-rich solution for anyone looking to elevate their home theater audio experience without the hassle of multiple speakers and complex wiring. With innovation at its core, the YSP-3000 delivers a sound experience that is both convenient and captivating.
Top Page Image Contents