Yamaha YSP-3000 Adjusting surround mode parameters, 59 En, When DTS Neo6 Music is selected

Adjusting surround mode parameters

You can configure the parameters for Dolby Pro Logic II Music and DTS Neo:6 Music to fine-tune the surround sound effect.

MUSIC MOVIE SPORTS

7	8	9
OFF		SUR. DECODE
0	+10
ENHANCER	ENTRY	MENU
CAT/	ENTER	TV/AV
A-E		YSP

DISPLAYRETURN

(U.S.A. and Canada models)

1Repeat steps 1 and 2 in “Enjoying 2-channel sources in surround sound” on page 57 and select PL II Music or Neo:6 Music.

2Press / to select the parameter.

ENTER

3Press / to configure the selected parameter.

ENTER

Enjoying surround sound

■When Dolby Pro Logic II Music is selected

PANORAMA

Gives the front left and right channel sound a wraparound effect, distributed throughout the entire surround sound field to give you an expansive feeling. Choices: ON/OFF

Default setting: OFF

DIMENSION

Adjusts the difference in volume between the front and surround channels to the desired volume balance. Control range: –3 (toward the surround direction) to +3 (toward the front direction)

Default setting: STD (standard)

C. WIDTH

Distributes the center channel sound to the left and right. If 0 is selected, the center channel sound is output only from the center channel.

Control range: 0 to 7

Default setting: 3

■ When DTS Neo:6 Music is selected

C. IMAGE
Adjusts the center image from three channels (front
left and right and center) to varying degrees.
Control range: 0.0 (wider) to 1.0 (toward the center)	BASIC OPERATION
Default setting: 0.3

English

59 En