Yamaha YSP-3000 75 En, Beam Adjustment Beam adjustment, Horizontal Angle Horizontal angle

Page 77

•Select ANGLE TO WALL OR CORNER if this unit is installed in the corner of your listening room. Adjust the width and length of your listening room as well as the distance of the listening position from this unit.

Listening position from the unit

Room width

MANUAL SETUP

■BEAM ADJUSTMENT (Beam adjustment)

Use to manually adjust the various sound beam settings. We recommend that you select 5 Beam as the beam mode before adjusting these parameters (see page 54).

Notes

•When INSTALLED POSITION is adjusted in MANUAL SETUP (see page 74), the factory default value is automatically set for this parameter except Center in FOCAL LENGTH (see page 76).

•Depending on the beam mode settings (see pages 54 and 60), some channel positions may not be available for selection. In this case, “– –” is displayed. When using Stereo plus 3 Beam as the beam mode, set the surround left and right signals to be output from the front left and right channels.

Room length

 

B)BEAM ADJUSTMENT

Choices for the room width and length:

 

.

a)HORIZONTAL ANGLE

2.0 m to 12.0 m (6.5 ft to 40.0 ft)

 

b)BEAM TRAVEL LENGTH

Choices for the listening position from this unit:

 

c)FOCAL LENGTH

 

d)TREBLE GAIN

1.8 m to 9.0 m (6.0 ft to 30.0 ft)

 

[p]/[p]:Up/Down

 

 

[ENTER]:Enter

 

A)SETTING PARAMETERS 2/3

 

 

 

 

 

 

----- 5.4m ---

 

Room width and

 

 

 

[ 5.4m ]

 

length

 

 

 

 

 

 

 

 

[p]/[p]:Up/Down [p]/[p]:Sel

 

 

[ENTER]:Return

HORIZONTAL ANGLE (Horizontal angle)

Use to adjust the horizontal angle of sound beams for each channel. By adjusting the horizontal angle of the sound beams, you can optimize the sound beam paths. A test tone is automatically output.

Listening position from the unit

A)SETTING PARAMETERS 3/3

\

[ 2.5m ]

\

[p]/[p]:Up/Down [p]/[p]:Sel [ENTER]:Return

( )

(+)

(+)

( )

Choices: L90° to R90°

Adjust toward L (left) to move the direction of the output to the left and adjust toward R (right) to move it to the right.

OPERATION

ADVANCED

 

 

Note

When you set the INSTALLED POSITION parameter in MANUAL SETUP (see page 74), the parameters newly set for the width and length of your listening room are automatically set as the factory default value.

a)HORIZONTAL ANGLE 1/5

 

 

5 beam

Front L

L90

 

 

 

 

R90

 

 

 

 

L65deg

*

0(deg)

[p]/[p]:Up/Down [p]/[p]:Sel [ENTER]:Return

English

75 En

Page 76 Page 78
Image 77
Page 76 Page 78
Contents YSP-3000 For U.K. Customers Contents Overview Features Features Using this manual Check that you have received all of the following parts Supplied accessoriesFront panel Controls and functionsInput STANDBY/ONFront panel display Rear panel 10 En Remote control Europe, Australia, Asia, and Korea models11 En 12 En PRESET/TUNEMemory SearchSound field program buttons Remote control U.S.A. and Canada models13 En CAT 14 EnCursor buttons 15 EnBefore installing this unit InstallationInstalling this unit 16 EnExample Installation examples17 En Using a rack Using a metal wall bracketUsing a stand 18 En19 En Connections20 En Hdmi cable OSD video pin cable Audio Optical cable Connections using Hdmi cables21 En OSD video pin cable Audio pin cable Optical cable Connecting a TV22 En Audio pin cable Digital audio pin cable Connecting a DVD player/recorder23 En Audio pin cable Optical cable Connecting a digital satellite tuner or a cable TV tuner24 En 25 En Connecting a digital airwave tunerMm stereo mini plug cable Connecting a portable audio player26 En Audio pin cable Optical cable Digital audio pin cable Connecting other external components27 En 28 En Connecting a subwooferConnecting the AC power supply cable Connecting the FM antennaAbout the IR in terminal U.S.A. and Canada models only 29 EnOperation range of the remote control Installing batteries in the remote controlClose the battery cover Getting startedPress STANDBY/ON again to set this unit to the standby mode VolumePress STANDBY/ON to turn on the power of this unit 31 En32 En Using SET MenuDisplaying the OSD on-screen display 33 En Flow chart of SET MenuChanging OSD language Language SetupSET Menu 34 En35 En Auto Setup IntelliBeamFlow chart of Auto Setup 36 En Installing the IntelliBeam microphonePress STANDBY/ON to turn off the power of this unit Assembling the supplied cardboard Microphone stand Using Auto Setup IntelliBeam37 En Set the operation mode selector to YSP Auto SetupPress / to select Auto Setup and press Enter 38 EnBEAM+SOUND Optimz Auto Setup Start39 En Check that the following screen is displayed on your TV Show Result40 En Before the Auto Setup procedure starts Error messages for Auto SetupWhile the Auto Setup procedure is in progress 41 EnSaving settings Using the system memory2MEMORY Save MemoryMemory Loading settings43 En Press Enter again44 En 1MEMORY LoadPress / to select Load and press Press Enter again Press / to select MEMORY1Selecting the input source PlaybackTV/STB Auto DVDAUX3 AUX1 AutoPlaying back sources 46 EnAudio Mute Adjusting the volumeDVD 5BEAM Audio Mute OFFRemote control functions FM tuningFM controls and functions 48 En49 En Automatic tuningManual tuning 50 En Automatic preset tuningPress Memory while the Memory indicator Is flashing Manual preset tuning51 En Tune into the desired FM stationPreset station number 1 to Selecting a preset stationA1FM 52 EnTune into the desired Radio Data System broadcasting station 53 EnBeam Enjoying surround sound54 En Press 5BEAM to select 5 Beam55 En Stereo plus 3 BeamMy Surround Input channel indicators Decoder indicators56 En Surround modes and recommended sources57 En Enjoying 2-channel sourcesSurround sound 58 En Press Volume +/- to adjust the volume levelSelect the TV channel you want to watch Press TVWhen Dolby Pro Logic II Music is selected Adjusting surround mode parametersWhen DTS Neo6 Music is selected 59 EnChannel stereo playback Enjoying stereo sound5CH Stereo 60 EnPlaying back sound clearly My Beam Using auto-adjust function61 En Press and hold MY Beam for more than two secondsPress / while MY Beam is displayed to adjust the beam angle Using manual-adjust functionAngle 62 EnWhat is a sound field? Using sound field programs63 En Elements of a sound field64 En Cinema DSP programsMusic program Movie programDSP Level Adjusting Cinema DSP effect levelsCinema DSP 65 EnPress Enhancer to select the Music Enhancer Using the music enhancer66 En NIGHTCINEMA, NIGHTMUSIC, TV Equal 67 En68 En Using the sleep timerUnit to confirm the setting for the sleep timer 69 En Canceling the sleep timerSleep OFF Press Display Displaying the input source information70 En 71 En Using the Hdmi control featureSound Menu 72 EnBeam Menu Input Menu73 En Manual SetupUsing Manual Setup Installed Position Installed position of this unit Setting parameters2BEAM Menu 74 EnHorizontal Angle Horizontal angle Beam Adjustment Beam adjustment75 En Focal Length Focal length 76 EnBeam Travel Length Beam travel length Image Location Image location Cimage Location77 En Atone Control 1SOUND MenuCmute Level 78 En79 En Daudio DelayEroom EQ 3INPUT Menu Binput ModeAinput Assignment 80 EnDinput Rename Hdmi SET Hdmi settingsEhdmi SET 81 EnXM Antenna Level XM antenna level A. and Canada models only FXM Antenna Level82 En AF.DISPLAY SET 4DISPLAY MenuBosd SET Cunit SETUsing the test tone Adjusting the audio balanceTest Front 84 En85 En Using the audio output being played back86 En 87 En Selecting the input modeAuto DTSUsing the system parameters Adjusting the system parametersProtect 88 En89 En Press / to switch between Protect on and Protect OFFProtect OFF Setting the Turn on Volume Setting the MAX VolumeMAX Volume SET Press / to adjust the maximum volume levelSetting the Demo Mode Turn VolumeDemo Mode Press / to adjust the initial volume levelDemo Setting the Panel Input KEYDemo OFF Panel Input KEYInput OFF Press / to switch between P.INPUT on P.INPUT OFFDisabling the front panel keys Panel KEYPanel Setting the Factory PresetPanel OFF Factory95 En Preset Reset PresetcancelPress / to switch between Preset Reset and Preset Cancel Setting remote control codes Remote control features96 En Code SET97 En Controlling other componentsOperating your TV TV INPUT1Operating your DVD player/recorder 98 EnOperating your STB CATV/Satellite tuner Operation buttons for DVD playersOperation buttons for VCR 99 EnOperating your VCR Setting macros for the TV with the tuning capability Using the TV macroPress Enter to confirm the macro setting 100 EnCanceling the macros Setting macros for the TV without the tuning capability101 En Operating macrosGeneral Troubleshooting102 En 103 En Problem Cause RemedyFM tuner Remote control104 En 105 En GlossaryLFE 0.1-channel 106 EnNeural Surround PCM Linear PCMNumerics Index107 En 108 En SpecificationsConditions 109 En

YSP-3000 specifications

The Yamaha YSP-3000 is a revolutionary digital sound projector that has carved a niche for itself in the realm of home theater audio systems. Launched as a versatile sound solution, the YSP-3000 integrates cutting-edge technology to deliver an immersive audio experience that mimics that of traditional multi-speaker surround sound systems.

One of the main features of the YSP-3000 is its unique Digital Sound Projector technology. It utilizes a series of miniature speakers arranged in an array to create a broad sound stage. This allows the YSP-3000 to project sound around the room, simulating the effect of surround sound without the need for additional speakers positioned throughout the space. The system employs sophisticated digital signal processing, which fine-tunes the audio output to achieve optimal acoustics tailored to the room’s characteristics.

An impressive characteristic of the YSP-3000 is the inclusion of 7-channel surround sound capabilities. This configuration ensures that users receive an immersive audio experience with clear dialogue and rich sound effects, ideal for movies, music, and gaming. The built-in subwoofer further enhances the low-end frequencies, providing deep bass that adds a layer of excitement to any audio playback.

The YSP-3000 also features Yamaha’s proprietary YSP sound field processing, which allows users to choose from multiple sound field modes to match their audio content. From gaming to music listening, users can select the option that best complements their experience. The system also supports various audio codecs including Dolby Digital and DTS, ensuring compatibility with a wide range of media formats.

Connectivity options are another strong point of the YSP-3000. It includes multiple HDMI inputs, enabling seamless integration with various devices such as Blu-ray players and gaming consoles. Additionally, it features optical and analog audio inputs, making it versatile enough for older audio devices. The included remote control offers intuitive navigation through settings and modes, making operation easy for users of all levels.

Overall, the Yamaha YSP-3000 stands out as a user-friendly and feature-rich solution for anyone looking to elevate their home theater audio experience without the hassle of multiple speakers and complex wiring. With innovation at its core, the YSP-3000 delivers a sound experience that is both convenient and captivating.
Top Page Image Contents