MANUAL SETUP
SUPPORT AUDIO (Support audio)
Use to select whether to play back HDMI audio signals on this unit or on another HDMI component connected to the HDMI OUT jack of this unit.
Choices:
a)SUPPORT AUDIO
OTHER |
[p]/[p]:Select [ENTER]:Return
Notes
•This setting is effective when HDMI CONTROL is set to OFF (see right).
•When HDMI CONTROL is set to ON, this setting is ineffective. This unit follows the setting of the HDMI
•The HDMI video signals input at one of the HDMI IN jacks of this unit are always output at the HDMI OUT jack of this unit.
VIDEO INFO (Video information)
Use to display the video information of the current input signal.
Choices: HDMI RES., HDMI ERROR
| b)VIDEO INFO |
. HDMI | RES.;;;;1080P |
HDMI | |
| [p]/[p]:Up/Down |
| [ENTER]:Return |
•Select HDMI RES. to display the resolution of the HDMI input/output signals.
•Select HDMI ERROR to display the error message for HDMI sources or devices connected
(see page 104 for details).
HDMI CONTROL (HDMI control)
Use this function to link this unit and an HDMI control- compatible TV via HDMI. You can turn on or off the power, select the input mode, and adjust the volume level of this unit using the remote control supplied with your HDMI
Choices: OFF, ON
c)HDMI CONTROL
OFF | pON XXXXXXX |
XXXXXXXXXXXXXXXXXXXXXXXXXXXXX XXXXXXXXXXXXXXXXXXXXXXXXXXXXX XXXXXXXXXXXXXXXXXXXXXXXXXXXXX
[p]/[p]:Select [ENTER]:Return
•Select ON to enable the HDMI control. The signals input at the HDMI IN jacks are output at the HDMI OUT jack when this unit is in the standby mode.
•Select OFF to disable the HDMI control. The signals input at the HDMI IN jacks are not output at the HDMI OUT jack when this unit is in the standby mode.
■XM ANTENNA LEVEL (XM antenna level)
(U.S.A. and Canada models only)
Use to display the current reception level of the XM Satellite Radio signals. For the best reception, orient the connected XM
Display status: NONE, 0 to 100%
F)XM ANTENNA LEVEL
XM ANTENNA LEVEL;;;;97%
[ENTER]:Return
Note
“NONE” is displayed if the XM