4 Taking Pictures
Basic Still Image Shooting
In this mode, all you have to do is press the shutter button and let the camera do
everything else.
AF Frame
1. Set the Camera Mode button to 
.
2.Aim the camera at the subject.
3.Press the T or W button to zoom in or out.
Mode | Focus Range |
|
|
W mode | 10 cm (3.94 inch) to infinity (∞) |
|
|
T mode | 50 cm (19.89 inch) to infinity (∞) |
|
|
4. Press the Shutter button halfway down to activate the
•The shutter speed and aperture values appear on the LCD monitor.
5.Press the Shutter button fully down to capture the image.
1. If the Shaking Warning indicator (
) is shown on the LCD, that means the shutter speed is low, and you should place the camera on a tripod or a steady place before shooting in order to ensure the image quality.
2. In the following conditions, the AF LED will continue to blink and the AF Frame will remain in red:
•There are several subjects at different distances within the focus lock area. Recompose the picture by moving the camera slightly.
•There is no color contrast. Recompose the picture with a subject that contains more color.
•There is insufficient lighting. If possible, increase the lighting in the surrounding area.
-18-