Concord Camera 4340z manual Installing the Driver and Directx 9 Windows 98/98SE, Click Next . fig

Macintosh

1.In the Apple Menu on the Menu bar, select About this Computer.

2.A window will appear with the computer’s operating system version. Confirm that your computer is version 9 or higher.

No installation of software is necessary for Macintosh users, please go to Page 47 for connecting your camera to the computer.

INSTALLING THE DRIVER AND DIRECTX 9 – WINDOWS 98/98SE

Do not connect the camera to your computer BEFORE the camera drivers and Microsoft DirectX 9 installation is completed.

Step 1 Make sure your camera is powered off and not connected to the computer. Step 2 Make sure the computer is powered on and Windows 98 or 98SE is running. Step 3 Close any other applications or software you may be running.

Step 4 Insert the supplied CD-ROM into your computer’s CD-ROM Drive.

NOTE: If the installer does not start automatically within 30 seconds after the CD-ROM has been inserted, click on “My Computer” either on the Desktop or in the Start Menu and locate the CD-ROM Drive. Double click on the CD-ROM Drive icon for installation and proceed to Step 5.

Step 5 Select the language. Click [OK]. (fig. 1.1)

Step 6 The installation screen will appear. Click on Install Camera Drivers. (fig. 1.2)

fig. 1.2

f ig. 1.1

Step 7 Click [Next >]. (fig. 1.3)

-38-