En
TV MODE
TV MODE
CHANGING THE TV MODE SETTING
The camera allows you to view individual files and to take pictures or record clips on the television. To begin, check your television documentation to determine the suitable type of TV broadcast standard (TV OPTION): NTSC or PAL.
SETUP
T SET AUTO OFF TIME
TV OPTION
LANGUAGE OPTION
RESTORE DEFAULT
LCD BRIGHTNESS
RETURN
SELECT
TV OPTION
NNTSC
P PAL
RETURN
OK SET
1.Slide the Mode switch to ( 
) Camera Mode
2.Press the MENU button.
3.Press 
or 
repeatedly until Setup is highlighted.
4.Press 
to enter the Setup menu.
5.In the Setup menu press 
or 
until TV option is highlighted
6.Press 
to enter the TV submenu.
7.Press 
or 
to change the setting to NTSC or PAL and press OK.
8.Press the MENU button to exit.
CONNECTING THE CAMERA TO THE TELEVISION
1.Connect the red sound terminal of the AV cable to the sound terminal marked AUDIO of your TV, and connect the yellow image terminal of the AV cable to the image input terminal jack marked VIDEO or VIDEO IN on your television.
2.Turn on your television.
3.Set the television to video mode according to the instructions in the owner’s manual. (This is usually channel 3, 4 or AV).
4.Connect the other end of the cable into the VIDEO port
located in the cable connection panel.
USING THE TV AS A LIVE VIEWFINDER
1.Connect the camera to the TV.
2.Turn the camera on.
3.Slide the Mode Switch to ( 
) Camera Mode.
4.The TV will become a Live Viewfinder.
Note: You may record your TV Mode session by using your VCR. Please refer to your VCR documentation to learn more about recording.
REVIEWING PICTURES AND VIDEO CLIPS ON YOUR TV
1.Connect the camera to the TV.
2.Turn the camera on.
3.Slide the Mode Switch to ( 
) Review mode.
4.Press 
or 
to scroll through the saved pictures and video clips.
• When an AVI file is displayed on the TV, press the OK button to view the video clip.
5.To view more options, press the MENU button to display the menu on the TV screen. Please refer to page 32/37 for further information.
59