Concord Camera Eye-Q 3340z manual Taking a Picture with the Viewfinder, Flash Ready LED

TAKING PICTURES

TAKING A PICTURE WITH THE VIEWFINDER

Diopter Adjusting

Taking a picture with the viewfinder:

1.Turn the camera on.

2.Set the camera to ( ) Camera Mode.

•The LCD can be switched off to conserve battery power by

pressing the ( ) button.

3.Frame the subject in the viewfinder.

•If the subject appears blurry, adjust the viewfinder focus by turning the diopter wheel.

4.Press the shutter button half-way to activate the auto-focus until the green AF LED stops blinking. (For information on Focus Lock, please go to p.14) (fig.1.1)

5.Press the shutter button fully to capture the image. (fig.1.2)

•The camera will beep when the image is captured if sound is activated.

•The camera will make a click sound.

OK

fig.1.1

OK

fig.1.2

FLASH READY LED

fig.1.1

fig.1.2

Flash Ready LED Status	Description
Steady (fig.1.1)	The camera is capturing a video clip.
Blinking (fig.1.2)	The flash is recharging. You may move the camera in this mode.

Note: Do not power the camera off or switch modes while the camera is capturing or storing a picture or video clip to prevent corrupting the picture or video clip being stored.

13