Connecting the Camera to the Computer

CONNECTING THE CAMERA TO THE COMPUTER

Note for Windows 98SE users: Do not connect the camera to your computer before the camera drivers and Microsoft DirectX 9 installation is completed.

1. Power the camera on.

2. Connect the camera to the computer with the Mini-USB cable provided.

•Plug the larger end of the Mini-USB cable that is included with the camera into your PC’s USB port. (Please refer to your computer’s documentation for more information on the location of the USB port.)

•Plug the small end of the Mini-USB cable into the USB port located in the

Cable Connection panel on the side of the camera.

3. When the camera is connected to the computer for the first time, the camera USB Mass Storage driver installation will begin. Please follow the on-screen instructions to complete the installation.

DOWNLOADING PICTURES AND VIDEO CLIPS ONTO YOUR COMPUTER

Note: Windows 98SE users must install the camera driver first. (Page 34)

Note: Windows 2000 users must install DirectX 9 to view video clips on the computer. (Page 36)

Downloading files from the camera:

•Internal memory: Do not insert the memory card.

•Memory Card: Insert the memory card.

Caution: Do not attempt to open the battery/memory door to insert or remove the memory card and/or batteries when the camera is connected to the computer.

FOR WINDOWS USERS

Downloading Pictures and Video Clips onto your computer:

1.Connect the camera to the computer.

2.Double-click on My Computer.

3.Double-click Removable Disk.

4.Double-click DCIM.

5.Double-click 100_3040.

•The stored pictures (JPG) and video clips (AVI) stored in the memory card will be displayed.

6.Click and drag the files into a directory in your computer to save them.

•To select all files, click Edit > Select all.

FOR MACINTOSH USERS

1.Power the camera on.

2.Connect the camera to the computer.

•After a few moments, the external hard drive will appear on the desktop.

3.Double-click the “untitled” removable drive that is on your desktop.

4.Double-click DCIM.

5.Double-click 100_3040.

•The stored pictures (JPG) and video clips (AVI) stored in the memory card will be displayed.

6.Drag and drop the image you want to save in the computer.

•To select all files, click Edit > Select all.

Note: You may also transfer the stored pictures and video clips on your memory card onto your computer by using a memory card reader. (sold separately)