Additional Information
Notes: Setting ʻFldʼ to ʻonʼ will automatically flash the unit to dump any excess energy if the user reduces the power output setting and makes no further adjustments within 2 seconds.
The modelling lamp has a micro controlled soft ʻonʼ and ʻoffʼ to prolong the life of the bulb.
The ʻkey clickʼ & ʻwarning sounderʼ can be turned ʻonʼ or ʻoffʼ independently of the ʻreadyʼ sounder. This option is available within the Advanced Functions.
Flashtube Replacement
Ensure that the unit is switched off and disconnect from the mains supply and then wait thirty minutes before touching/removing the flashtube.
Remove the protective cap and unwind the twisted wire from the flashtube support.
Gently pull the flashtube assembly out of the unit.
To replace the assembly, hold the flashtube as shown and taking care to support both legs gently but firmly push the flashtube into position. Next wind the trigger wire around the flashtube support. Always replace with the correct flashtube assembly.
Spare/Replacement Flashtubes.
BW2032 UV coated BW2030 Clear
Battery Power
The Esprit Gemini Digital is great studio monolight, but what about if you need to work out on location?
Thanks to Bowens handy battery packs, your Bowens Esprit Gemini Digital units can leave the studio to go on location anytime, anywhere.
Included in Bowens range of battery packs are the
14www.bowens.co.uk
Battery Power
The Bowens Explorer 1500 represents the
increment and accuracy.
In addition, two Bowens Gemini sockets allow the photographer anything up to four light sources and a massive 3000Ws from this feature rich pack.
Total freedom and flexibility, whenever and wherever quality light is required.
Explorer Battery Generator | BW7640 |
Also Available for the Bowens battery range: |
|
BW7635 | |
Spare Explorer Battery | BW7642 |
BW7632 | |
Bowens Universal 2Amp SLA Charger | BW1227 |
Car Charger | BW1245 |
Pulsar Radio Trigger
With the Esprit Gemini Digital monolights you are free from mains power. With the Pulsar Radio Trigger system you can be free from sync cables too.
This multifunctional device can be used to trigger flash units, film and digital cameras and light meters up to 100m away.
Because the Pulsar is a radio transmitter rather than IR, it allows for triggering around corners or through walls and is not affected by high ambient light situations. Choose from four individual channels and six studio setting per channel, each providing a unique ID for different flash devices or combine them to trigger all equipment within a given setup or studio.
Because of its
Pulsar | BW5150 |
Pulsar (Twin Pack) | BW5160 |
www.bowens.co.uk 15