Bdabc
efghi
Power Supply
Preparations
Using the AC adaptor
Connect the AC adaptor supplied.
aDC IN jack (DC IN 4.5 V ) b Right side panel of the unit
c AC adaptor
d AC power outlet
Note:
The unit is in the standby condition when the AC adaptor is connected. The primary circuit is always “live” as long as the AC adaptor is connected to an AC power outlet.
Using dry-cell batteries (not included)
After disconnecting the AC adaptor, insert two “R6” (LR- 6) alkaline batteries.
The procedure for inserting and removing
Battery indicator
eBattery indicator
The battery indicator changes as shows on the left ac- cording to the remaining capacity of the battery.
fFully charged g Low battery h Empty
i After a while the unit will turn off
Rechargeable batteries: Recharge batteries.
Notes:
•The length of time the unit can continue further opera- tion after the battery indicator changes to “ ” differs depending on the type of batteries used.
•The battery indicator may not be correctly displayed if rechargeable batteries, other than those designated by JVC, are used.
•When power is supplied from the AC adaptor, “ ” in- dicator always lights up.
Tip:
Turning off the
If the unit malfunctions or freezes during use, disconnect the power source (the AC adaptor and batteries) once. Then, connect the power source and operate the unit again.
8