16
Interference on camera picture
1.Make sure each camera (transmitter) is within range, and that no large obstructions are blocking the signal.
2.Try repositioning the camera, LCD monitor or both to improve the reception quality.
3.Reposition other nearby equipment transmitting on the 900MHz frequency.
4.Adjust the antenna for the camera, LCD monitor or both to obtain best image.
Audio problems
1.Ensure the volume is turned up sufficiently on the monitor
2.Make sure the sound is within the microphone range.
3.If the units emit a loud wailing sound (feeds back), try moving the camera away from the LCD monitor or angle the monitor differently.
SPECIFICATIONS (Subject to change without notice.)
CAMERA
TV System: | NTSC standard |
Image Sensor: | 1/3” CMOS |
Integrated Lens: | 5.6mm, F1.8 fixed focus |
Resolution: | 360 horizontal TV lines |
Frequency Range: | 902~928MHZ |
High Speed Electronic Shutter: |