6
2.Similarly, set the slide switch located inside the battery compartment area of the Portable LCD monitor to match the channel used by the camera.
3.Plug AC power adapter of the LCD monitor into the power jack at the rear of the charging base. This provides power to the Portable LDC monitor and also charges the LCD monitor’s battery.
4.Turn on the LCD monitor by pressing the POWER button 
on the front of the monitor. Adjust the volume to the midpoint position.
5.Be sure to charge the Portable LCD Monitor for
at least 3 hours before removing from the charging cradle in order to sufficiently charge the battery. Battery Standby time: up to 5hrs., continuous operation up to 3 hrs.
Volume
Adjustment
Menu
Alarm
R
E
G
G
I
R
Sensitivity Adjustment
2
1
CHANNEL SELECTION
Channel
Selection
Switch
T
Battery Compartment