Jasco 45236 user manual Auto Mode 2 Camera Operation

Page 8

8

1 2

CAMERA 1

Channel Setting

 

Portable LCD Monitor

 

 

Settings

 

OFF

 

Camera 1 only

 

ON 1

2

1

2

 

 

 

OFF

 

Camera 2 only

 

1

2

 

ON

 

 

OFF

CAMERA 2ON 1 2 Camera 1 & 2 Channel Setting

separately. IMPORTANT: When using more than one camera, each camera must be assigned to a specific channel using the channel selection switch located on the underside of the camera housing.

Select either 1 or 2 for each camera. Each camera must be assigned to a specific channel; both cameras cannot be on the same channel or the signals will cancel out. If using only one camera you can select either Ch 1 or Ch 2; whichever provides the best picture. The slide switch, located in the battery compartment of the LCD monitor, must be set to reflect the channels in use.

Auto Mode (2 Camera Operation)

To have the LCD Monitor automatically switch between two active channels, first check the monitor is set to 1 & 2 position. Next, press the ‘A’ (Auto) button on the front panel of the Monitor. The green LED will light and the Monitor will automatically switch to a different channel (1 or 2). The monitor will display images from both cameras alternately.

Image 8
Contents Wireless Color Camera with Portable LCD Monitor Product Features Package Contents Before YOU InstallPage Connecting the Camera to the Portable LCD Monitor Channel Selection Multi-Camera Operation Manual ModeLCD Monitor Auto Mode 2 Camera Operation Stand-by Mode Cycle Time Setting Time interval between camera selectionsNight Vision Corresponds to the camera channel setting Wall MountMenu Functions Top of LCD Monitor Menu Using the 45236 Wireless Color Camera System with a VCR Optional Wireless Battery Pack Available Sold SeparatelyTrouble Shooting M.-5 p.m. CSTInterference on camera picture Portable LCD Monitor Risk of fire and shock