9
Note: two cameras must be available in order for Auto mode to operate correctly. Both cameras cannot be on the same channel or the signals will cancel out.
Stand-by Mode
Pressing the ‘S’ button places the system in Stand- by mode and will utilize the Audio Notification/ Detection feature (see pg. 12). The LCD monitor screen will turn off while in standby mode. In this mode the system continuously scans the active cameras. If a camera detects sound, the LCD monitor will turn on, display the camera’s picture and an alert (beeping) will sound. Several minutes after the last detection, the screen returns to standby mode while the LCD monitor resumes scanning. Pressing the Manual or Auto button will also wake up the LCD.
Cycle Time Setting
(Time interval between camera selections)
The default cycle time for the Portable LCD Monitor is preset to 4 seconds. To change the cycle time, press both of the buttons (Auto & Manual) simultaneously. The LED will flash; each flash adds one extra second of cycle time. The cycle time can be verified by the number of flashes the LED makes when you release the