Jasco 45236 user manual LCD Monitor, Manual Mode, Multi-Camera Operation

7

CHANNEL SELECTION Manual, Auto or Stand-by The wireless system can be set to operate in one of three modes:

Power

Manual, Auto or Stand-by. The desired operating mode can be selected using the buttons on the front panel of the LCD monitor.

LCD

MONITOR

Adjustable

Antenna

	Manual
M
A	Auto
S	Stand
	by

12

Manual Mode

To select one of the two channels manually, press the ‘M’ (Manual) button on the front panel of the Monitor. The green LED will light for the corresponding channel. The Monitor will switch to a different channel (1 or 2) each time the MANUAL button is pressed. When you have selected the channel with the active camera, that video will appear on the monitor screen. Each camera must be assigned to a specific channel; both cameras cannot be on the same channel or the signals will cancel out.

Multi-Camera Operation

This wireless surveillance system is designed to work with up to 2 cameras. Additional cameras are sold