Pelco CC3600 manual Switch Settings, Sync Synchronization Switch Setting

SWITCH SETTINGS

BLACK REPRESENTS

SWITCH POSITION

10

9

8

7

6

5

4

3

2

1

Figure 7. Switch Settings

Color Balance - Switch Settings 9 and 10

Pelco’s CC3500 and CC3600 cameras have four color balance settings. Auto (Default setting) - Automatically corrects the color balance of the picture.

6300°K - May improve the color balance in areas where 6300°K lighting is the main source.

3200°K - May improve the color balance in some indoor lighting conditions.

4200°K - May improve some indoor fluorescent lighted scenes.

Gamma - Switch Setting 8

Set the Gamma level to one of the following:

Normal (Default setting) - Increases visibility in dark areas of the picture.

01236

10 AUTO

9

10 6300OK

9

10 3200OK

9

10 4200OK

9

8 NORMAL (0.45)

8 LINEAR (1.0)

Linear - Linear response increases (overall) contrast.

AGC (Automatic Gain Control) - Switch Setting 7 Automatically adjusts the image to compensate for changes in light levels when using fixed or manual iris lenses. Following are the AGC switch settings:

ON (Default setting) - Enables the AGC mode. OFF - Disables the AGC mode.

Lens Mode Selector (AI/DD Switch) - Switch Setting 6 The AI/DD switch setting is determined by the type of lens used:

AI - Auto iris lens

DD- Direct drive lens

SYNC (Synchronization) - Switch Setting 5

Locks the frame rate to the power supply frequency. Eliminates vertical roll caused by multiple cameras connected to the same switching device. Each camera output is synchronized to the frequency of the power supply. Set the camera synchronization mode to one of the following:

Line Lock (LL) - Line-locks frame rate of cameras. Internal - Disables line lock.

7 AGC ON

7 AGC OFF

6 AI LENS

6 DD LENS

5 LL

5 INTERNAL

[ 12 ] Pelco Manual C1981M-C (8/02)