Pelco DD53CBW18-X manual IR CUT Filter, Auto IR Level, Dark

Page 19

SPECTRA III

LANGUAGEENGLISH

<SYSTEM INFORMATION> <DISPLAY SETUP> <DOME SETTINGS> ACK ALERT*

RESET CAMERA

CYCLE CAMERA POWER

REBOOT SYSTEM

EXIT

DOME SETTINGS

<CAMERA>

<MOTION> <POWER UP> <LINE SYNC> <PRESETS> <PATTERNS> <ZONES>

<WINDOW BLANKING> <ALARMS>

<AUX>

<TITLE TEXT> <ALERT>* <CLEAR> <PASSWORD>

BACK

EXIT

CAMERA

AUTO FOCUS

ON

ZOOM LIMIT

X144

ZOOM SPEED

MEDIUM

LOW LIGHT LIMIT

2

IR CUT FILTER

AUTO

AUTO IR LEVEL

DUSK

<ADVANCED SETTINGS>

 

BACK

 

EXIT

 

*This setting only applies to Pressurized Spectra III dome systems with software version 1.27 or higher.

IR CUT FILTER

Spectra III has two modes of operation: color, and black and white. You can increase sensitivity in low light conditions by switching to black and white mode (removing the IR cut filter). Color mode is preferred in normal lighting conditions.

The following are the settings for the IR cut filter:

OFF

Manual operation is controlled by preset 88 (filter IN) and 89

 

(filter OUT).

AUTO (default)

Automatic operation is controlled by the Auto IR Level setting.

Auto IR Level

The auto IR level is the light level at which the infrared filter switches IN or OUT.

Following are the available settings for the Auto IR Level:

DUSK (default)approximately 6 lux (black-white) approximately 13 lux (color)

DARK

approximately 0.1 lux (black-white)

 

approximately 2 lux (color)

NOTE: If backlight compensation is ON and the IR cut filter switches OUT in normal lighting conditions, adjust the Auto IR Level to a darker setting. Refer to the Backlight Compensation section.

NOTE: LOW LIGHT does not mean NO LIGHT. Some type of illumination is required (street light, IR light, etc.). The camera is not sensitive to IR light when the IR cut filter is IN.

Quick Programming Guide

(See page 11)

C2487M-B (11/05)

19

Page 18 Page 20
Image 19
Page 18 Page 20
Contents DD53CBW18 & DD53CBW18-X Spectra III SeriesPage Page Page Contents Blank ALL ABOVE/BLANK ALL below Pelco Spectra Version Address Comm 2400, N, 8 Configure DoneWelcome Getting StartedHOW to Operate Your Dome System CM6700/CM6800 Accessing Main Menu PresetNET300/NET350/NET4001A Preset Function Following presets are reserved for special functionsPage Quick Programming Guide LanguageSee System Information Display Setup Label Position Button on the controller Dome SettingsCamera Auto FocusHigh Zoom LimitZoom Speed LOW Light LimitAuto IR Level IR CUT FilterDark Numeric Value Advanced Camera SettingsShutter Speed AGC LimitAuto Iris Level Auto IrisAuto Iris Peak Auto White Balance Auto SharpnessGain OFF default There are two backlight compensation settingsBacklight Compensation BLC Volt peak-to-peak Video LevelSet the video output to one of the following NormalThere are two auto flip modes Motion SettingsAuto Flip Proportional PANPark Action None default No actionPreset Park TimeScan Speed Preset Freeze FrameLimit stop is reached Limit StopsManual ScanAzimuth Zero Power UP Action Power UpLine Sync Phase settings range from 0-359 degreesDome synchronizes to an internal clock Determined zero reference point PresetsFollowing presets are predefined for specific functions Preset ActionQuick Programming Guide Patterns Press Iris Open. The cursor moves to the right Move the cursor beside Zone Enabled or Zone BlankingZones To edit a zone labelTo set the window blanking area Window BlankingWindow Blanking Enabled Window Blanking DisabledBlank All Above ReverseClear Window Blank ALL ABOVE/BLANK ALL belowPress Iris Open to enter selection AlarmsLatching AuxMomentary Title Text Repeat AlertSystem Condition Alert Message ACK Action Reset AlertCurrent Reading Clear Password Reboot System RESET, Cycle POWER, RebootReset Camera Cycle Camera PowerUpload Icon SOFTWARE/LANGUAGE File UploadUpload Icon Ntsc SpecificationsDD53CBW18 DD53CBW18-XRadio and Television Interference Regulatory NoticesPage Page ISO9001

DD53CBW18-X specifications

The Pelco DD53CBW18-X is a cutting-edge surveillance dome camera designed to meet the diverse needs of modern security systems. Renowned for its sleek design and robust functionality, this camera is equipped with a range of features that make it an ideal choice for both indoor and outdoor applications.

One of the standout features of the DD53CBW18-X is its 18x optical zoom capability. This zoom allows the camera to capture high-quality images from long distances, providing users with detailed visuals without sacrificing image clarity. The camera also incorporates a high-definition imaging sensor, which enhances image quality, particularly in low light conditions. With its wide dynamic range technology, the camera can effectively manage various lighting situations, ensuring that both bright and dark areas in a scene are adequately captured.

Furthermore, the DD53CBW18-X is built with durable materials, making it resistant to harsh weather conditions. Its IP66 rating signifies that the camera is dust-tight and can withstand powerful water jets, ensuring reliable performance in outdoor environments. This rugged construction is complemented by a vandal-resistant design, providing additional protection against tampering or damage.

In terms of installation, the Pelco DD53CBW18-X offers flexible mounting options. It can be easily installed on ceilings or walls, allowing for versatile placement in a variety of settings, from retail spaces to parking lots. The user-friendly interface and comprehensive setup guide simplify the installation process, ensuring that even those with limited technical expertise can successfully integrate the camera into their security system.

The camera also features advanced video analytics capabilities. With motion detection, digital zoom, and automatic tracking, users can benefit from enhanced surveillance intelligence. These features allow for proactive monitoring, sending alerts when motion is detected and enabling quick responses to potential security breaches.

Another notable characteristic of the DD53CBW18-X is its compatibility with various network infrastructures, facilitating seamless integration with existing surveillance systems. Additionally, the camera supports various video codecs, ensuring efficient data compression and transmission, which is critical for optimizing bandwidth usage in networked environments.

In summary, the Pelco DD53CBW18-X is a highly versatile surveillance camera that combines advanced imaging technology, robust construction, and user-friendly features. Its optical zoom, weather resistance, video analytics, and installation flexibility make it a top choice for securing both indoor and outdoor spaces effectively.
Top Page Image Contents