Pelco DD53CBW18-X manual ACK Action, Current Reading, Reset Alert

Page 43

SPECTRA III

LANGUAGEENGLISH

<SYSTEM INFORMATION> <DISPLAY SETUP> <DOME SETTINGS> ACK ALERT*

RESET CAMERA

CYCLE CAMERA POWER

REBOOT SYSTEM

EXIT

DOME SETTINGS

<CAMERA>

<MOTION> <POWER UP> <LINE SYNC> <PRESETS> <PATTERNS> <ZONES>

<WINDOW BLANKING> <ALARMS>

<AUX>

<TITLE TEXT> <ALERT>

<CLEAR>

<PASSWORD>

BACK

EXIT

ALERT

 

REPEAT

CONSTANT

ACK ACTION

ALWAYS ON

ACTIVATE AUX

NO

<CURRENT READING>

 

RESET ALERT

 

BACK

 

EXIT

 

CURRENT READING

TEMPERATURE

0°C

 

0°F

DEWPOINT

0°C

 

0°F

PRESSURE

0.0 PSIG

REFRESH

0.0 BAR

 

BACK

 

EXIT

 

ACK ACTION

Acknowledge action programs the alert label behavior after the alert condition has been acknowledged. The following settings are available for ACK ACTION:

ALWAYS ON

The alert label is displayed until alert conditions are cleared.

OFF 8 HRS

The alert label is turned off for 8 hours. Label returns after 8 hours

 

if the alert condition persists.

OFF 24 HRS

The alert label is turned off for 24 hours. Label returns after 24

 

hours if the alert condition persists.

OFF 48 HRS

The alert label is turned off for 48 hours. Label returns after 48

 

hours if the alert condition persists.

ACTIVATE AUX

This setting activates an auxiliary when an alert condition exists. ACTIVATE AUX settings include the following:

NO (default)

Not activated.

1

An alert condition will close AUX 1.

2

An alert condition will close AUX 2.

CURRENT READING

The Current Reading menu displays the existing status of temperature, pressure, and dew point inside the dome system. An arrow displayed to the left of a menu item denotes that an alert condition exists.

An up arrow indicates the reading is over the threshold. A down arrow indicates the reading is below the threshold.

The high temperature alert occurs if the temperature is above 140°F (60°C). The low temperature alert occurs if the temperature is below -40°F (-40°C). The high pressure alert occurs if the pressure is above 11 psig.

The low pressure alert occurs if the pressure is below 1 psig.

The dew point (high humidity) alert occurs if the difference between the temperature and the dew point is less than or equal to 3°C.

NOTE: The normal operating temperature inside the unit will be greater than the temperature outside the back box due to the heat emitted by the system’s electronics.

RESET ALERT

Reset alert clears the alert condition and removes the alert label from the monitor. The system automatically checks internal conditions 60 seconds after reset. If conditions are still unaccept- able, the alert label reappears on the screen indicating further corrective action is required.

Quick Programming Guide

(See page 11)

C2487M-B (11/05)

43

Page 42 Page 44
Image 43
Page 42 Page 44
Contents DD53CBW18 & DD53CBW18-X Spectra III SeriesPage Page Page Contents Blank ALL ABOVE/BLANK ALL below Pelco Spectra Version Address Comm 2400, N, 8 Configure DoneWelcome Getting StartedHOW to Operate Your Dome System CM6700/CM6800 Accessing Main Menu PresetNET300/NET350/NET4001A Preset Function Following presets are reserved for special functionsPage Quick Programming Guide LanguageSee System Information Display Setup Label Position Button on the controller Dome SettingsCamera Auto FocusHigh Zoom LimitZoom Speed LOW Light LimitAuto IR Level IR CUT FilterDark Numeric Value Advanced Camera SettingsShutter Speed AGC LimitAuto Iris Level Auto IrisAuto Iris Peak Auto White Balance Auto SharpnessGain OFF default There are two backlight compensation settingsBacklight Compensation BLC Volt peak-to-peak Video LevelSet the video output to one of the following NormalThere are two auto flip modes Motion SettingsAuto Flip Proportional PANPark Action None default No actionPreset Park TimeScan Speed Preset Freeze FrameLimit stop is reached Limit StopsManual ScanAzimuth Zero Power UP Action Power UpLine Sync Phase settings range from 0-359 degreesDome synchronizes to an internal clock Determined zero reference point PresetsFollowing presets are predefined for specific functions Preset ActionQuick Programming Guide Patterns Press Iris Open. The cursor moves to the right Move the cursor beside Zone Enabled or Zone BlankingZones To edit a zone labelTo set the window blanking area Window BlankingWindow Blanking Enabled Window Blanking DisabledBlank All Above ReverseClear Window Blank ALL ABOVE/BLANK ALL belowPress Iris Open to enter selection AlarmsLatching AuxMomentary Title Text Repeat AlertSystem Condition Alert Message ACK Action Reset AlertCurrent Reading Clear Password Reboot System RESET, Cycle POWER, RebootReset Camera Cycle Camera PowerUpload Icon SOFTWARE/LANGUAGE File UploadUpload Icon Ntsc SpecificationsDD53CBW18 DD53CBW18-XRadio and Television Interference Regulatory NoticesPage Page ISO9001

DD53CBW18-X specifications

The Pelco DD53CBW18-X is a cutting-edge surveillance dome camera designed to meet the diverse needs of modern security systems. Renowned for its sleek design and robust functionality, this camera is equipped with a range of features that make it an ideal choice for both indoor and outdoor applications.

One of the standout features of the DD53CBW18-X is its 18x optical zoom capability. This zoom allows the camera to capture high-quality images from long distances, providing users with detailed visuals without sacrificing image clarity. The camera also incorporates a high-definition imaging sensor, which enhances image quality, particularly in low light conditions. With its wide dynamic range technology, the camera can effectively manage various lighting situations, ensuring that both bright and dark areas in a scene are adequately captured.

Furthermore, the DD53CBW18-X is built with durable materials, making it resistant to harsh weather conditions. Its IP66 rating signifies that the camera is dust-tight and can withstand powerful water jets, ensuring reliable performance in outdoor environments. This rugged construction is complemented by a vandal-resistant design, providing additional protection against tampering or damage.

In terms of installation, the Pelco DD53CBW18-X offers flexible mounting options. It can be easily installed on ceilings or walls, allowing for versatile placement in a variety of settings, from retail spaces to parking lots. The user-friendly interface and comprehensive setup guide simplify the installation process, ensuring that even those with limited technical expertise can successfully integrate the camera into their security system.

The camera also features advanced video analytics capabilities. With motion detection, digital zoom, and automatic tracking, users can benefit from enhanced surveillance intelligence. These features allow for proactive monitoring, sending alerts when motion is detected and enabling quick responses to potential security breaches.

Another notable characteristic of the DD53CBW18-X is its compatibility with various network infrastructures, facilitating seamless integration with existing surveillance systems. Additionally, the camera supports various video codecs, ensuring efficient data compression and transmission, which is critical for optimizing bandwidth usage in networked environments.

In summary, the Pelco DD53CBW18-X is a highly versatile surveillance camera that combines advanced imaging technology, robust construction, and user-friendly features. Its optical zoom, weather resistance, video analytics, and installation flexibility make it a top choice for securing both indoor and outdoor spaces effectively.
Top Page Image Contents