Pelco DD53CBW18-X manual Repeat, System Condition Alert Message

Page 42

Alert

SPECTRA III

LANGUAGEENGLISH

<SYSTEM INFORMATION> <DISPLAY SETUP> <DOME SETTINGS> ACK ALERT*

RESET CAMERA

CYCLE CAMERA POWER

REBOOT SYSTEM

EXIT

NOTE: The Alert section only applies to Pressurized Spectra III dome systems with software version 1.27 or higher. Spectra III systems that are not pressurized or pressurized systems that do not have dome drive software version 1.27 or higher will not display this menu item. Software version 1.27 or higher includes the software to monitor temperature, pressure, and dew point for Pressurized Spectra III systems.

Sensors strategically placed inside the pressurized dome system continually monitor pressure, temperature, and dew point. If internal conditions reach unacceptable levels, an alert message appears on the screen describing the alert condition. Example: If pressure drops below 1 psig, “LOW PRESSURE” is displayed on the monitor.

DOME SETTINGS

<CAMERA>

<MOTION> <POWER UP> <LINE SYNC> <PRESETS> <PATTERNS> <ZONES>

<WINDOW BLANKING> <ALARMS>

<AUX>

<TITLE TEXT> <ALERT> <CLEAR> <PASSWORD>

BACK

EXIT

The following system conditions will trigger an alert message:

System Condition

Alert Message

Temperature is above 140°F (60°C)

HIGH TEMPERATURE

Temperature is below -40°F (-40°C).

LOW TEMPERATURE

Pressure is above 11 psig.

HIGH PRESSURE

Pressure is below 1 psig.

LOW PRESSURE

The difference between the temperature and the dew point is

DEW POINT (HIGH

less than or equal to 3°C.

HUMIDITY)

 

 

The alert message will be repeatedly displayed until the system controller acknowledges the alert condition by selecting ACK ALERT in the main menu. Once acknowledged, the alert message changes to the programmed acknowledge action (ACK ACTION). If the alert condition remains active after a period of time, the alert message reappears on the monitor, restarting the alert message cycle. This cycle will continue to repeat until the alert condition is resolved.

ALERT

 

 

 

REPEAT

CONSTANT

ACK ACTION

ALWAYS ON

ACTIVATE AUX

NO

<CURRENT READING>

 

RESET ALERT

 

BACK

 

EXIT

 

REPEAT

This setting programs how often an alert message is repeatedly displayed until the system controller acknowledges the alert condition. The following are the settings for REPEAT:

CONSTANTThe alert message is continuously displayed on the monitor until acknowledged.

15 MIN

The alert message is displayed every 15 minutes for a 15-second

 

duration until acknowledged.

30 MIN

The alert message is displayed every 30 minutes for a 15-second

 

duration until acknowledged.

60 MIN

The alert message is displayed every 60 minutes for a 15-second

 

duration until acknowledged.

42

C2487M-B (11/05)

Page 41 Page 43
Image 42
Page 41 Page 43
Contents Spectra III Series DD53CBW18 & DD53CBW18-XPage Page Page Contents Blank ALL ABOVE/BLANK ALL below Getting Started Configure DoneWelcome Pelco Spectra Version Address Comm 2400, N, 8HOW to Operate Your Dome System Accessing Main Menu Preset CM6700/CM6800NET300/NET350/NET4001A Following presets are reserved for special functions Preset FunctionPage Language Quick Programming GuideSee System Information Display Setup Label Position Auto Focus Dome SettingsCamera Button on the controllerLOW Light Limit Zoom LimitZoom Speed HighIR CUT Filter Auto IR LevelDark AGC Limit Advanced Camera SettingsShutter Speed Numeric ValueAuto Iris Auto Iris LevelAuto Iris Peak Auto Sharpness Auto White BalanceGain There are two backlight compensation settings OFF defaultBacklight Compensation BLC Normal Video LevelSet the video output to one of the following Volt peak-to-peakProportional PAN Motion SettingsAuto Flip There are two auto flip modesPark Time None default No actionPreset Park ActionPreset Freeze Frame Scan SpeedScan Limit StopsManual Limit stop is reachedAzimuth Zero Power Up Power UP ActionPhase settings range from 0-359 degrees Line SyncDome synchronizes to an internal clock Preset Action PresetsFollowing presets are predefined for specific functions Determined zero reference pointQuick Programming Guide Patterns To edit a zone label Move the cursor beside Zone Enabled or Zone BlankingZones Press Iris Open. The cursor moves to the rightWindow Blanking To set the window blanking areaWindow Blanking Disabled Window Blanking EnabledBlank ALL ABOVE/BLANK ALL below ReverseClear Window Blank All AboveAlarms Press Iris Open to enter selectionAux LatchingMomentary Title Text Alert RepeatSystem Condition Alert Message Reset Alert ACK ActionCurrent Reading Clear Password Cycle Camera Power RESET, Cycle POWER, RebootReset Camera Reboot SystemSOFTWARE/LANGUAGE File Upload Upload IconUpload Icon DD53CBW18-X SpecificationsDD53CBW18 NtscRegulatory Notices Radio and Television InterferencePage Page ISO9001

DD53CBW18-X specifications

The Pelco DD53CBW18-X is a cutting-edge surveillance dome camera designed to meet the diverse needs of modern security systems. Renowned for its sleek design and robust functionality, this camera is equipped with a range of features that make it an ideal choice for both indoor and outdoor applications.

One of the standout features of the DD53CBW18-X is its 18x optical zoom capability. This zoom allows the camera to capture high-quality images from long distances, providing users with detailed visuals without sacrificing image clarity. The camera also incorporates a high-definition imaging sensor, which enhances image quality, particularly in low light conditions. With its wide dynamic range technology, the camera can effectively manage various lighting situations, ensuring that both bright and dark areas in a scene are adequately captured.

Furthermore, the DD53CBW18-X is built with durable materials, making it resistant to harsh weather conditions. Its IP66 rating signifies that the camera is dust-tight and can withstand powerful water jets, ensuring reliable performance in outdoor environments. This rugged construction is complemented by a vandal-resistant design, providing additional protection against tampering or damage.

In terms of installation, the Pelco DD53CBW18-X offers flexible mounting options. It can be easily installed on ceilings or walls, allowing for versatile placement in a variety of settings, from retail spaces to parking lots. The user-friendly interface and comprehensive setup guide simplify the installation process, ensuring that even those with limited technical expertise can successfully integrate the camera into their security system.

The camera also features advanced video analytics capabilities. With motion detection, digital zoom, and automatic tracking, users can benefit from enhanced surveillance intelligence. These features allow for proactive monitoring, sending alerts when motion is detected and enabling quick responses to potential security breaches.

Another notable characteristic of the DD53CBW18-X is its compatibility with various network infrastructures, facilitating seamless integration with existing surveillance systems. Additionally, the camera supports various video codecs, ensuring efficient data compression and transmission, which is critical for optimizing bandwidth usage in networked environments.

In summary, the Pelco DD53CBW18-X is a highly versatile surveillance camera that combines advanced imaging technology, robust construction, and user-friendly features. Its optical zoom, weather resistance, video analytics, and installation flexibility make it a top choice for securing both indoor and outdoor spaces effectively.
Top Page Image Contents