Pelco DD53CBW18-X manual Following presets are reserved for special functions, Preset Function

QUICK START GUIDE – SYSTEM SETUP

Presets

The following presets are reserved for special functions.

Preset Function

33Flip command

34Pan zero command

83-87 Reserved

88IR filter IN (color)

89IR filter OUT (black-white)

90-91 Manual limit stops

92-93 Scan limit stops

94Reserved

95Select main programming menu

96Stop a scan

97Random scanning

98Frame scanning

99Start auto scanning

NOTE: For American Dynamics controllers with only 32 presets, switch SW3-1 on the dome drive to the ON position. When SW3-1 is ON, preset

99 becomes 32	92 becomes 25
98 becomes 31	91 becomes 24
97 becomes 30	90 becomes 23
96 becomes 29	89 becomes 22
95 becomes 28	88 becomes 21
93 becomes 26

If the limit stops are turned off, presets 23-26 can be used as regular presets.

DOME SETTINGS

<CAMERA>

<MOTION> <POWER UP> <LINE SYNC> <PRESETS> <PATTERNS> <ZONES>

<WINDOW BLANKING> <ALARMS>

<AUX>

<TITLE TEXT> <ALERT>** <CLEAR> <PASSWORD>

BACK

EXIT

	SPECTRA III
	LANGUAGE	ENGLISH
	<SYSTEM INFORMATION>
	<DISPLAY SETUP>
	<DOME SETTINGS>
	ACK ALERT**
	RESET CAMERA
	CYCLE CAMERA POWER
	REBOOT SYSTEM
	EXIT
	DISPLAY SETUP
PRESET LABEL		2 (SECS)
ZONE LABEL		2 (SECS)
ZOOM		2 (SECS)
AZIMUTH/ELEVATION		2 (SECS)
DIRECTION		OFF
ALARM MESSAGE		2 (SECS)

<LABEL POSTIONS> RESTORE FACTORY DEFAULTS

BACK

EXIT

LABEL POSITION

[ZONE LABEL-------]

[PRESET LABEL-------]

[ALARM 1-------]

[ALERT MESSAGE-------]**

[TITLE TEXT]

SAVE AND EXIT CANCEL AND EXIT HELP

XXX°/-XX°

NE

XXX.XX

SYSTEM INFORMATION

DOME DRIVE MODEL		DD53CBW18
BACK BOX MEMORY		AVAILABLE
SOFTWARE VERSION		XX.X
BIOS VERSION		XX.X
FONT VERSION		XX.X
COMM		2400, N, 8, 1
D ADDRESS		1
P ADDRESS		2
CM9500 MODE		OFF
32 PRESETS		OFF
PROTOCOL		C
PRESSURIZED**		X.XX
<ADDITIONAL>
BACK
EXIT
ADDITIONAL
FREE MEMORY		18304
LAST RESET		POWER ON
AZIMUTH ZERO OFFSET		0O
MOTOR ACTIVE		YES
CAMERA ACTIVE		YES
FPGA VERSION		X
VIDEO LEVEL		NORMAL
CAMERA		XXXX-XXXX
LANGUAGE 1		ENGLISH X.XX
LANGUAGE 6	ITALIANO X.XX
BACK
EXIT

Quick Programming Guide

Access main menu (preset 95). See the Accessing Main Menu (Preset 95) section.

Use the joystick* to position the cursor beside menu selection.

Press Iris Open, the submenu/cursor moves to the right.

Move the joystick up or down to view selections.

Press Iris Open to make selection.

Press Iris Close to cancel selection.

CAMERA		MOTION			POWER UP	LINE SYNC
AUTO FOCUS	ON	AUTO FLIP	ON	POWER UP ACTION AUTO		LINE SYNC	ON
ZOOM LIMIT	X144	PROPORTIONAL PAN	ON			LINE SYNC PHASE	0
ZOOM SPEED	MEDIUM	PARK TIME (MINUTES)	0
LOW LIGHT LIMIT		PARK ACTION	NONE
IR CUT FILTER	AUTO	SCAN SPEED DEG/S	25	BACK		BACK
AUTO IR LEVEL	DUSK	PRESET FREEZE FRAME	AUTO	EXIT		EXIT
<ADVANCED SETTINGS>		LIMIT STOPS	ON
		<SET MANUAL STOPS>
		<CLEAR MANUAL STOPS>
BACK		<SET SCAN STOPS>
		<CLEAR SCAN STOPS>

EXIT

<SET AZIMUTH ZERO> <CLEAR AZIMUTH ZERO>

BACK

EXIT

ADVANCED SETTINGS		* If your controller does not have a joystick, use the up or down key.
SHUTTER SPEED	AUTO

	PRESETS		PATTERNS		ZONES
	PRESET NUMBER	1
			PATTERN NUMBER	1	ZONE NUMBER	1
* * * PRESET NOT DEFINED * * *
			<PROGRAM PATTERN>		* * * ZONE NOT DEFINED * * *
<EDIT PRESET LABEL>
			<CLEAR PATTERN>
<EDIT PRESET SCENE>					<EDIT ZONE LABEL>
			BACK
					<EDIT ZONE>
			EXIT			NO
<CLEAR PRESET>					ZONE ENABLED
			REFERENCE INFORMATION		ZONE BLANKING	OFF
BACK			PATTERN USAGE	0%	<CLEAR ZONE>
			REMAINING	100%
EXIT					BACK
REFERENCE INFORMATION		-
	AZIMUTH				EXIT
	ELEVATION	-
	ZOOM	-

***This feature is functional only if the dome drive is installed in the Spectra III SE back box.

WINDOW BLANKING

ALARMS***

AUX***

TITLE TEXT

ALERT**

CLEAR

PASSWORD

STYLE

GRAY

ALARM CONTACT

N/O

AUX 1 MODE

TOGGLE

ENABLE TITLE TEXT

REPEAT

CONSTANT

RESTORE FACTORY DEFAULTS

ENABLE PASSWORD

OFF

DWELL TIME (SECS)

1

<EDIT TITLE TEXT>

ACK ACTION

ALWAYS ON

<EDIT PASSWORD>

BLANK ALL ABOVE

OFF

BACK

ACTIVATE AUX

NO

BACK

BLANK ALL BELOW

OFF

EXIT

AUX 2 MODE

TOGGLE

<CURRENT READING>

EXIT

BACK

<SET WINDOW>

DWELL TIME (SECS)

1

RESET ALERT

BACK

BACK

BACK

EXIT

BACK

EXIT

EXIT

EXIT

EXIT

SET WINDOW		CURRENT READING**		EDIT THE PASSWORD
WINDOW NUMBER	1	TEMPERATURE	0°C	----------

AGC LIMIT	28
AUTO IRIS	AUTO
AUTO IRIS LEVEL	66
AUTO IRIS PEAK	8
AUTO SHARPNESS	ON
SHARPNESS LEVEL	26
AUTO WHITE BALANCE	ON
R GAIN	482
B GAIN	678
BACKLIGHT COMP	OFF
VIDEO LEVEL	HIGH

BACK

EXIT

**This setting only applies to Pressurized Spectra III dome systems with software version 1.27 or higher. Spectra III systems that are not pressurized or pressurized systems that do not have dome drive software version 1.27 or higher will not display this menu item.

Software version 1.27 or higher includes the software to monitor temperature, pressure, and dew point for Pressurized Spectra III systems.

			0°F	1234567890	OK
<EDIT WINDOW LOCATION>		DEWPOINT	0°C
				ABCDEFGHIJ	CANCEL
<EDIT WINDOW ZOOM>			0°F	KLMNOPQRST
		PRESSURE	0.0 PSIG		SPACE
				UVWXYZ.,-/
ENABLE WINDOW	NO		0.0 BAR
		REFRESH		abcdefghij	BACKSPACE
REVERSE				klmnopqrst
CLEAR WINDOW		BACK		uvwxyz#&:*
BACK		EXIT
EXIT

C2487M-B (11/05) 11