Pelco C3453M-B manual Specifications, Models, Mechanical, General

Specifications

MODELS

Model Number	Basic Enclosure	120VAC with 24VAC Camera Power	24VAC with 24VAC Camera Power	230VAC with 24VAC Camera Power	Heater/Blower	EM1512 Feed Through Wall Mount	Sun Shroud	Enclosure Power Consumption*	Maximum Power Consumption Capacity
EH1512	•
EH1512MT	•					•
EH1512-1	•	•			•			12 W	25 W
EH1512-2	•		•		•			12 W
EH1512-3	•			•	•			12 W	25 W
EH1512-1MT	•	•			•	•		12 W	25 W
EH1512-2MT	•		•		•	•		12 W
EH1512-3MT	•			•	•	•		12 W	25 W
EH1512-1MTS	•	•			•	•	•	12 W	25 W
EH1512-2MTS	•		•		•	•	•	12 W
EH1512-3MTS	•			•	•	•	•	12 W	25 W

*Enclosure power consumption does not include camera wattage.

MECHANICAL

Camera Mounting	Single slot for adjustable camera positioning on snap-in camera sled
Camera and Lens Size	Accepts camera and lens combinations† (including BNC connector) up to 9.00" L x 2.87" W x 3.00" H
	(22.86 x 7.28 x 7.62 cm)
Viewing Window	0.118-inch (3 mm) thick scratch-resistant Lexan®
Viewing Area	2.81" W x 2.47" H (7.14 x 6.27 cm)
Cable Entry	1 x PG9 and 1 x PG11 compression glands on bottom; PG9 0.312-inch (0.8 cm) and PG11 0.395 (1.0 cm)
	maximum cable diameters
Cable Entry Holes	1 x 0.750-inch (1.91 cm) diameter and 1 x 0.630-inch (1.6 cm) diameter;
	0.750-inch hole will accept 1/2-inch NPT conduit fitting when enlarged to 0.875-inch;
	0.630-inch hole will accept 1/4-inch NPT conduit fitting
Lid Fastening	3 Allen-head screws

GENERAL

Construction	Die-cast aluminum
Finish	Alodine with gray polyester powder coat
Environment‡	Indoor/outdoor ambient temperature -10° to 120° F (-23° to 49° C)
Unit Length
Base	13.38 inches (33.99 cm)
Overall	14.39 inches (36.55 cm)

*Maximum recommended camera power consumption is 6.7 watts.

†Assumes the lens is fully extended.

‡Check the environmental specification of your specific camera/lens.

12 C3453M-B (4/09)